To read this content please select one of the options below:

A new exploration on passive control of transonic flow over a backward-facing step

Xiang Shen (Department of Mechanical and Construction Engineering, Northumbria University, Newcastle upon Tyne, UK)
Kai Zeng (Aviation Key Laboratory of Science of Technology on High Speed and High Reynolds Number Aerodynamic Force Research, AVIC Aerodynamics Research Institute, Shenyang, China)
Liming Yang (Department of Aerodynamics, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China)
Chengyong Zhu (School of New Energy, Nanjing University of Science and Technology, Jiangyin, China)
Laurent Dala (Department of Mechanical and Construction Engineering, Northumbria University, Newcastle upon Tyne, UK)

International Journal of Numerical Methods for Heat & Fluid Flow

ISSN: 0961-5539

Article publication date: 19 February 2024

Issue publication date: 13 August 2024

66

Abstract

Purpose

This paper aims to study passive control techniques for transonic flow over a backward-facing step (BFS) using square-lobed trailing edges. The study investigates the efficacy of upward and downward lobe patterns, different lobe widths and deflection angles on flow separation, aiming for a deeper understanding of the flow physics behind the passive flow control system.

Design/methodology/approach

Large Eddy Simulation and Reynolds-averaged Navier–Stokes were used to evaluate the results of the study. The research explores the impact of upward and downward patterns of lobes on flow separation through the effects of different lobe widths and deflection angles. Numerical methods are used to analyse the behaviour of transonic flow over BFS and compared it to existing experimental results.

Findings

The square-lobed trailing edges significantly enhance the reduction of mean reattachment length by up to 80%. At Ma = 0.8, the up-downward configuration demonstrates increased effectiveness in reducing the root mean square of pressure fluctuations at a proximity of 5-step height in the wake region, with a reduction of 50%, while the flat-downward configuration proves to be more efficient in reducing the root mean square of pressure fluctuations at a proximity of 1-step height in the near wake region, achieving a reduction of 71%. Furthermore, the study shows that the up-downward configuration triggers early spanwise velocity fluctuations, whereas the standalone flat-downward configuration displays less intense crosswise velocity fluctuations within the wake region.

Practical implications

The findings demonstrate the effectiveness of square-lobed trailing edges as passive control techniques, showing significant implications for improving efficiency, performance and safety of the design in aerospace and industrial systems.

Originality/value

This paper demonstrates that the square-lobed trailing edges are effective in reducing the mean reattachment length and pressure fluctuations in transonic conditions. The study evaluates the efficacy of different configurations, deflection angles and lobe widths on flow and provides insights into the flow physics of passive flow control systems.

Keywords

Acknowledgements

The research was supported by the Royal Society International Exchanges Cost Share Programme (Grant No. IEC\NSFC\191409).

Citation

Shen, X., Zeng, K., Yang, L., Zhu, C. and Dala, L. (2024), "A new exploration on passive control of transonic flow over a backward-facing step", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 34 No. 7, pp. 2601-2625. https://doi.org/10.1108/HFF-07-2023-0404

Publisher

:

Emerald Publishing Limited

Copyright © 2024, Emerald Publishing Limited

Related articles