To read this content please select one of the options below:

(excl. tax) 30 days to view and download

PZT‐based Thick Films and the Development of a Piezoelectric Pressure Sensor

B. Morten, G. De Cicco, A. Gandolfi, C. Tonelli

Microelectronics International

ISSN: 1356-5362

Article publication date: 1 February 1992

266

Abstract

A study has been carried out on the relationship between the composition, poling condition and piezoelectric properties of thick film layers. Pastes based on lead‐titanate‐zirconate (PZT) powders, with either PbO or a lead‐alumina‐silicate glass frit as binder, were prepared. Microstructure, electrical and mechanical properties were analysed. Processing and poling conditions modify these properties; then a wide latitude of opportunities is offered in the choice of ferroelectric/piezoelectric characteristics of the layers used as sensing elements for sensors. A pressure sensor was realised where a circular diaphragm of alumina supports two piezoelectric layers obtained by screen printing and firing a PZT/PbO‐based ferroelectric paste. The design and the performance characteristics are described.

Citation

Morten, B., De Cicco, G., Gandolfi, A. and Tonelli, C. (1992), "PZT‐based Thick Films and the Development of a Piezoelectric Pressure Sensor", Microelectronics International, Vol. 9 No. 2, pp. 25-28. https://doi.org/10.1108/eb044572

Publisher

:

MCB UP Ltd

Copyright © 1992, MCB UP Limited

Related articles