To read this content please select one of the options below:

NUMERICAL STUDY OF THE EFFECTS OF ROTATIONAL BUOYANCY ON FULLY DEVELOPED FLOW IN ROTATING RECTANGULAR DUCTS

T. BO (Mechanical Engineering Department, UMIST, Manchester M60 1QD, UK)
H. IACOVIDES (Mechanical Engineering Department, UMIST, Manchester M60 1QD, UK)

International Journal of Numerical Methods for Heat & Fluid Flow

ISSN: 0961-5539

Article publication date: 1 July 1996

101

Abstract

This article examines the influence of centrifugal buoyancy on the hydrodynamic and thermal behaviour in fully developed flow through an orthogonally rotating duct of aspect ratio 2:1. A series of computations have been performed at rotation numbers ranging from 0 to 0.2, for constant‐density flows (no buoyancy) and also for different levels of outward and inward buoyancy. The resulting comparisons reveal that for a Reynolds number of 32,500, rotational buoyancy effects become significant at Rayleigh number values greater than 107. In outward flows, buoyancy is found to strengthen the effects of the Coriolis force on the mean motion and, by raising turbulence levels, buoyancy also enhances wall heat transfer along both the pressure and the suction side of the rotating duct. In inward flows, it is found that strong buoyancy can reverse the direction of the Coriolis‐induced secondary motion, which causes a strong rise in wall heat transfer along the suction side and a similarly significant fall in heat transfer along the pressure side. The computed effects on heat transfer are in qualitative agreement with the findings of a number of experimental studies. For both inward and outward flows, at a constant Reynolds number, the modifications of centrifugal buoyancy on the side‐averaged levels of heat transfer correlate reasonably well with the rotational Rayleigh number.

Keywords

Citation

BO, T. and IACOVIDES, H. (1996), "NUMERICAL STUDY OF THE EFFECTS OF ROTATIONAL BUOYANCY ON FULLY DEVELOPED FLOW IN ROTATING RECTANGULAR DUCTS", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 6 No. 7, pp. 47-62. https://doi.org/10.1108/eb017551

Publisher

:

MCB UP Ltd

Copyright © 1996, MCB UP Limited

Related articles