Full harmonic spectrum calculation of magnetic pressures in synchronous permanent magnet machines based on a new realistic partial analytical model: application to SVPWM and DPWM2

Abstract

Purpose

The purpose of this paper is to propose a new method that allows to compare the magnetic pressures of different pulse width modulation (PWM) strategies in a fast and efficient way.

Design/methodology/approach

The voltage harmonics are determined using the double Fourier integral. As for current harmonics and waveforms, a new generic model based on the Park transformation and a dq model of the machine was established taking saturation into consideration. The obtained analytical waveforms are then injected into a finite element software to compute magnetic pressures using nodal forces.

Findings

The overall proposed method allows to accelerate the calculations and the comparison of different PWM strategies and operating points as an analytical model is used to generate current waveforms.

Originality/value

While the analytical expressions of voltage harmonics are already provided in the literature for the space vector pulse width modulation, they had to be calculated for the discontinuous pulse width modulation. In this paper, the obtained expressions are provided. For current harmonics, different models based on a linear and a nonlinear model of the machine are presented in the referenced papers; however, these models are not generic and are limited to the second range of harmonics (two times the switching frequency). A new generic model is then established and used in this paper after being validated experimentally. And finally, the direct injection of analytical current waveforms in a finite element software to perform any magnetic computation is very efficient.

Citation

Benharref, S., Lanfranchi, V., Depernet, D., Hamiti, T. and Bazhar, S. (2024), "Full harmonic spectrum calculation of magnetic pressures in synchronous permanent magnet machines based on a new realistic partial analytical model: application to SVPWM and DPWM2", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 43 No. 3, pp. 535-550. https://doi.org/10.1108/COMPEL-11-2023-0564