To read this content please select one of the options below:

Effect of rolling on microstructure and mechanical properties of dual phase Mg–8Li–graphene composite

Kavimani V. (Department of Mechanical Engineering, Karpagam Academy of Higher Education, Coimbatore, India)
Kumaran S. (Department of Metallurgical and Materials Engineering, National Institute of Technology Tiruchirappalli, Tamil Nadu, India)
Vignesh Ponnusamy (Department of Metallurgical and Materials Engineering, National Institute of Technology Tiruchirappalli, Tamil Nadu, India)
Navneet Kumar (Department of Metallurgical and Materials Engineering, National Institute of Technology Tiruchirappalli, Tamil Nadu, India)

World Journal of Engineering

ISSN: 1708-5284

Article publication date: 31 May 2024

15

Abstract

Purpose

This study aims to analyze the effect of interrupted rolling on microstructures and mechanical properties of Mg–8Li–xGr composite is investigated.

Design/methodology/approach

Graphene reinforced composite was developed by using stir casting route and rolled with different reduction in thickness such as 50, 75 and 90%. Microstructure, hardness and tensile characteristics of the rolled samples were evaluated.

Findings

Investigation on microstructures of rolled composite depicts that increase in rolling reduction % resulted in fine elongated grains and decreased aspect ratio. Further, it was also observed that increasing percentage of rolling reduction promotes the dissolution of ß Li phase and as a result the ductility of composite decreases. Interrupted rolled samples showcase higher hardness when compared with as-cast composite. Composite rolled with 90% reduction displays higher yield strength of 219 MPa. Hardening capacity of composites decreases with increase in reduction percentage due to the effective reduction in grain size.

Originality/value

Investigation on the influence of interrupted rolling on microstructures and mechanical properties of Mg graphene composite. The in-depth understanding of this will help to improve its wide spread application.

Keywords

Acknowledgements

Funding: This work was fully funded under DST-SERB-TARE, New Delhi (File no. TAR/2019/000092). The authors thank for the extended support provided by Karpagam Academy of Higher Education (parent institution) and National Institute of Technology Tiruchirappalli (host institution).

Ethical approval: Not applicable.

Competing interests: The authors declare no competing interests.

Data availability: The data used to support the findings of this study are included within the article. Further data or information is available from the corresponding author upon request.

Conflicts of interest: The authors declare that there are no conflicts of interest regarding the publication of this paper.

Citation

V., K., S., K., Ponnusamy, V. and Kumar, N. (2024), "Effect of rolling on microstructure and mechanical properties of dual phase Mg–8Li–graphene composite", World Journal of Engineering, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/WJE-10-2023-0462

Publisher

:

Emerald Publishing Limited

Copyright © 2024, Emerald Publishing Limited

Related articles