Numerical and experimental study of the combustion phenomenon when the compression ignition is fuelled with mineral diesel
ISSN: 1708-5284
Article publication date: 30 May 2019
Issue publication date: 14 June 2019
Abstract
Purpose
The purpose this experimentation is to study the combustion characteristics of compression ignition engine fuelled with mineral diesel. The reason behind the numerical simulation is to validate the experimental results of the combustion characteristics.
Design/methodology/approach
The numerical analysis was carried out in this study using MATLAB Simulink, and the zero dimensional combustion model was applied to predict the combustion parameters such as in cylinder pressure, pressure rise rate and rate of heat release.
Findings
Incorporating the dynamic combustion duration with respect to variable engine load in the zero dimensional combustion model using MATLAB Simulink reduced the variation of experimental and numerical outputs between 5.5 and 6 per cent in this analysis.
Research limitations/implications
Validation of the experimental analysis is very limited. Investigations were performed using zero dimensional combustion model, which is the very appropriate for analysing the combustion characteristics.
Originality/value
Existing studies assumed that the combustion duration period as invariant in their numerical analysis, but with the real time scenario occurring in CI engine, that is not the case. In this analysis, mass fraction burnt considering the dynamic combustion duration was incorporated in the heat transfer model to reduce the error variation between experimental and numerical studies.
Keywords
Citation
Venkatesan, H., J., G.J., Sivamani, S. and T., M.P. (2019), "Numerical and experimental study of the combustion phenomenon when the compression ignition is fuelled with mineral diesel", World Journal of Engineering, Vol. 16 No. 3, pp. 341-350. https://doi.org/10.1108/WJE-08-2018-0285
Publisher
:Emerald Publishing Limited
Copyright © 2019, Emerald Publishing Limited