To read this content please select one of the options below:

Water generation from atmospheric air by using desiccant materials- nature-based solution – a review

Manoj Kumar (Department of Mechanical Engineering, National Institute of Technology Srinagar, Srinagar, India)
Neeraj Mehla (Department of Mechanical Engineering, National Institute of Technology Kurukshetra, Kurukshetra, India)
Shobhit Srivastava (Department of Mechanical Engineering, Gurukul Kangri (Deemed to be University) Haridwar, Haridwar, India)
Ravi Kant Ravi (Department of Mechanical Engineering, Govind Ballabh Pant Institute of Engineering and Technology Pauri, Pauri, India)

World Journal of Engineering

ISSN: 1708-5284

Article publication date: 3 May 2022

Issue publication date: 21 August 2023

200

Abstract

Purpose

This paper aims to provide a critical review of water generation from atmospheric air by using desiccant materials. Over the past few years, there has been very high stress on water scarcity, especially in Asian and African countries. Because of this insecurity, many countries are focusing on their research in the field of water technologies. Water generation from atmospheric air by using desiccant materials is one of the techniques among the air-to-water generators (AWGs).

Design/methodology/approach

A structured and systematic literature review has been presented to observe and understand the past trend/patterns in the field of water generation from atmospheric air by using desiccant materials. To understand the water generation technologies based on desiccant materials, the research papers from the years 1987 to 2022 have been studied and included.

Findings

The properties of the different and most probable desiccant materials in the field of AWGs have been discussed. A detailed review of testing reports of collected water samples has also been presented in tabular form. Finally, the economic analysis has been done and future prospects have been discussed. It is also found that the capacity of solid desiccant materials to adsorb the water is less as compared to liquid desiccant materials. But, the adsorption capacity can be improved by using composite desiccant materials.

Originality/value

The uniqueness of this manuscript lies in the compiling and examination of the existed published research papers, including variables such as author, year and geographical location, experimental/simulative, types of desiccant material, type of setup, desiccant material type and quantity and type of concentrator. This manuscript provides critique to the empirical and conceptual research in AWG technologies and also stimulates researchers to explore the topic very carefully.

Keywords

Acknowledgements

Retraction notice: The publishers of World Journal of Engineering wish to retract the article by Manoj Kumar, Neeraj Mehla, Shobhit Srivastava, Ravi Kant Ravi (2022), “Water generation from atmospheric air by using desiccant materials- nature-based solution – a review”, published in World Journal of Engineering, Vol. ahead-of-print, No. ahead-of-print, https://doi.org/10.1108/WJE-07-2021-0420. It has come to our attention that there are concerns that the peer review process was compromised and that as a result the findings cannot be relied upon. The publisher of the journal sincerely apologises to the readers.

Citation

Kumar, M., Mehla, N., Srivastava, S. and Ravi, R.K. (2023), "Water generation from atmospheric air by using desiccant materials- nature-based solution – a review", World Journal of Engineering, Vol. 20 No. 5, pp. 956-973. https://doi.org/10.1108/WJE-07-2021-0420

Publisher

:

Emerald Publishing Limited

Copyright © 2022, Emerald Publishing Limited

Related articles