Experimental investigation on flexural behavior of textile-reinforced concrete: effect of reinforcement type and dune sand addition

Abstract

Purpose

To contribute to the identification of the parameters influencing the behavior of textile-reinforced concrete (TRC), the purpose of this paper is to investigate the flexural behavior of TRC-based plates under four-point bending notably designed in the context of sustainable development and the substitution of mortar components with natural and abundant materials.

Design/methodology/approach

An extensive experimental campaign was focused about two main parameters. The first one emphases the textile reinforcements, such as the number of layers, the nature and the textile mesh size. In the second step, the composition of the mortar matrix was explored through the use of dune sand as a substitute of the river one.

Findings

Test results in terms of load-displacement response and failure patterns were highlighted, discussed and confronted to literature ones. As key findings, an increase of the load-bearing capacity and ductility, comparable to the use of an industrially produced second textile layer was recorded with the use of dune sand in the mortar mix design. The designed ecofriendly samples with economic concerns denote the significance of obtained outcomes in this research study.

Originality/value

The novelty of the present work was to valorize the use of natural dune sand to design new TRC samples to respond to the environmental and economical requirements. The obtained values provide an improved textiles–matrix interface performance compared to classical TRC samples issued from the literature.

Citation

Bouzeboudja, F. and Si Salem, A. (2025), "Experimental investigation on flexural behavior of textile-reinforced concrete: effect of reinforcement type and dune sand addition", World Journal of Engineering, Vol. 22 No. 1, pp. 14-28. https://doi.org/10.1108/WJE-05-2023-0139