Modified analytical model of magnetohydrodynamics angular rate sensor for low-frequency compensation

Abstract

Purpose

Magnetohydrodynamics angular regular sensor (MHD ARS) has been used in many applications for its low noise in wide bandwidth, impact resistance and low power consumption; however, it is unable to estimate the angular velocity at low frequencies such as below 1 Hz. It is difficult to design compensation methods without an exact model. The aim of this study is to investigate a more exact analytical model characterization of the sensor’s frequency response, especially at a low-frequency zone.

Design/methodology/approach

A correction coefficient of electromagnetic force in simplified MHD ARS model was introduced according to the theoretical analysis of MHD flow and it was obtained by numerical simulation of electromagnetic force varying with time, space structure and frequency.

Findings

To make comparison, the transfer function of the designed MHD ARS in the experiment was identified using Gauss–Newton method with reasonable weights. The identification results confirmed the analytical model. Furthermore, a digital filter was designed based on the analytical model, and the compensation results showed that the frequency limit at low-frequency side was extended from 1 to 0.01 Hz.

Originality/value

The modified analytical model can describe the MHD ARS’s frequency response exactly and may be applied in its low-frequency compensation.

Citation

Ji, Y., Li, X., Wu, T. and Chen, C. (2016), "Modified analytical model of magnetohydrodynamics angular rate sensor for low-frequency compensation", Sensor Review, Vol. 36 No. 2, pp. 193-199. https://doi.org/10.1108/SR-09-2015-0148