Formaldehyde sensing properties of ZnO-based hollow nanofibers

Abstract

Purpose

The purpose of this paper is to synthesize SnO₂–ZnO hollow nanofibers, study their sensing properties and introduce an attractive candidate for formaldehyde detection in practice.

Design/methodology/approach

Pure and SnO₂–ZnO hollow nanofibers were synthesized by electrospinning method and characterized via X-ray diffraction, field-emission scanning electron microscopy and Fourier transform infrared spectroscopy. The formaldehyde-sensing properties were investigated.

Findings

The optimum performance was obtained at 260°C by the 14 at.% SnO₂–ZnO hollow nanofiber sensor. The sensor could detect formaldehyde down to 0.1 ppm with rapid response–recovery time (4-6 s and 7-9 s, respectively), high sensitivity, good selectivity and stability. The relationship between the sensor’s sensitivity and formaldehyde concentration suggests that the adsorbed oxygen species on the sensor’s surface is O2−. The prominent sensing properties are attributed to the one dimensional hollow nanofiber structures and the promoting effects of SnO₂.

Practical implications

The sensor fabricated from 14 at.% SnO₂–ZnO fibers exhibits excellent formaldehyde-sensing characteristics. It can be used for formaldehyde detection in practice.

Social implications

The electrospinning method is a very simple and convenient method for fabricating hollow nanofibers and the sensing material is of low cost.

Originality/value

To the best of the authors’ knowledge, studies on formaldehyde sensing of SnO₂–ZnO hollow nanofibers have not been reported before.

Citation

Wei, S., Zhang, Y. and Zhou, M. (2014), "Formaldehyde sensing properties of ZnO-based hollow nanofibers", Sensor Review, Vol. 34 No. 3, pp. 327-334. https://doi.org/10.1108/SR-09-2013-726