Experimental assessment and validation of an oil ferrous wear debris sensors family for wind turbine gearboxes

Abstract

Purpose

The purpose of this study was to perform a complete experimental assessment of a family of oil ferrous wear debris sensor is performed. The family comprised the original sensor and its re-engineered evolution, which is capable of detecting both amount and size of wear debris particles trapped by the sensor and some predefined oil condition properties.

Design/methodology/approach

In this work, the first step was to perform a design of experiments for the sensor validation. A specially defined test rig was implemented, and different ferrous wear debris was collected. For each sensor, two different tests were performed. The first test was called a “void test”, where quantified amounts of debris were collided with the sensor without oil. The second one was a dynamic test, where the sensor was installed in the test rig and different amounts of wear debris were added at a constant rate. In addition, specific tests related with oil properties detection were studied.

Findings

The results show excellent correlation of the sensor output signal with the amount of wear debris and a satisfactory detection of debris size in all ranges. Also, the dynamic test presented adequate representativeness, and sensors performed well in this scenario.

Practical implications

This paper shows the practical implementation of this type of sensor and the usual detection range and rate of detection for different debris size and quantities.

Originality/value

This work has a great utility for maintenance managers and equipment designers to fully understand the potential of this type of sensor and its suitability for the application required.

Citation

Macián, V., Tormos, B., Miró, G. and Rodes, I. (2018), "Experimental assessment and validation of an oil ferrous wear debris sensors family for wind turbine gearboxes", Sensor Review, Vol. 38 No. 1, pp. 84-91. https://doi.org/10.1108/SR-04-2017-0065