A temperature-insensitive FBG acceleration sensor with sinusoid-shaped curved beams

Abstract

Purpose

This study aims to solve the problem of temperature cross sensitivity of fiber Bragg grating in structural health monitoring, proposing a novel acceleration sensor based on strain chirp effect which is insensitive to temperature.

Design/methodology/approach

A kind of M-shaped double cantilever beam structure is developed. The fiber grating is pasted in the gradient strain region of the beam, and the chirp effect is produced under the action of non-uniform stress, and then the change of acceleration is converted into the change of reflection bandwidth to demodulate and eliminate the temperature interference. Through theoretical analysis, simulation and experimental verification with rectangular beam sensor.

Findings

The results show that the sinusoidal curvature beam sensor is insensitive to the change of temperature and is more likely to produce chirp effect. The sensitivity is about 317 pm/g, and the natural frequency is 56 Hz.

Originality/value

This paper fulfils an insensitive to temperature changes sensor which has effectively solved the temperature cross-sensitivity problem in building structure health monitoring.

Citation

Qiu, Z., Mu, R., Zhang, Y., Li, Y., Teng, Y. and Hong, L. (2022), "A temperature-insensitive FBG acceleration sensor with sinusoid-shaped curved beams", Sensor Review, Vol. 42 No. 1, pp. 115-124. https://doi.org/10.1108/SR-02-2021-0035