Sub-limit detection in SAW sensors by FFT spectral analysis of frequency time instability

Abstract

Purpose

The detection of H₂ concentrations in concentrations undetectable by the conventional detection method of surface acoustic wave (SAW) sensors based on frequency shift, by correlating analyte presence with Fourier spectra components.

Design/methodology/approach

Fast Fourier Transform (FFT) and autocorrelation analysis of phase noise in a SnO2-coated SAW sensor was performed. Fourier spectra were obtained by FFT from the SAW sensor resonance frequency instability, in the absence of analyte, and for H₂ concentrations between 0.08 and 0.4 per cent.

Findings

All analyte concentrations are below the sensor limit of detection, which is 0.8 per cent for H₂. Although these analyte concentrations caused no significant change in the resonance frequency of the SAW resonator, the FFT spectra presented several modifications, namely, the appearance of a new peak and the decrease of randomness. The authors consider that the effect is because of the chaotic behavior of the temporal dependence of the SAW resonance frequency. This explanation is substantiated by the decrease observed in the SAW oscillator autocorrelation function, which is an indication for a chaotic behavior.

Practical implications

As chaotic systems are extremely sensitive to perturbation, measurement methods based on chaos diagnosis could potentially greatly improve the SAW detection.

Originality/value

Fourier spectra components were correlated with analyte presence in concentrations undetectable by the conventional SAW detection method based on frequency shift.

Citation

Nicolae, I., Miu, D. and Viespe, C. (2019), "Sub-limit detection in SAW sensors by FFT spectral analysis of frequency time instability", Sensor Review, Vol. 39 No. 2, pp. 246-251. https://doi.org/10.1108/SR-02-2018-0048