To read this content please select one of the options below:

(excl. tax) 30 days to view and download

Review of recent trends in ultrasonic additive manufacturing: current challenges and future prospects

Kashif Ishfaq, Zafar Abas, M. Saravana Kumar, Muhammad Arif Mahmood

Rapid Prototyping Journal

ISSN: 1355-2546

Article publication date: 25 January 2023

Issue publication date: 2 June 2023

616

Abstract

Purpose

This study aims to outline the current challenges in ultrasonic additive manufacturing (AM). AM has revolutionized manufacturing and offers possible solutions when conventional techniques reach technological boundaries. Ultrasonic additive manufacturing (UAM) uses mechanical vibrations to join similar or dissimilar metals in three-dimensional assemblies. This hybrid fabrication method got attention due to minimum scrap and near-net-shape products.

Design/methodology/approach

This paper reviews significant UAM areas in process parameters such as pressure force, amplitude, weld speed and temperature. These process parameters used in different studies by researchers are compared and presented in tabular form. UAM process improvements and understanding of microstructures have been reported. This review paper also enlightens current challenges in the UAM process, process improvement methods such as heat treatment methods, foil-to-foil overlap and sonotrode surface roughness to increase the bond quality of welded parts.

Findings

Results showed that UAM could solve various problems and produce net shape products. It is concluded that process parameters such as pressure, weld speed, amplitude and temperature greatly influence weld quality by UAM. Post-weld heat treatment methods have been recommended to optimize the mechanical strength of ultrasonically welded joints process parameters. It has been found that the tension force is vital for the deformation of the pre-machined structures and for the elongation of the foil during UAM bonding. It is recommended to critically investigate the mechanical properties of welded parts with standard test procedures.

Originality/value

This study compiles relevant research and findings in UAM. The recent progress in UAM is presented in terms of material type, process parameters and process improvement, along with key findings of the particular investigation. The original contribution of this paper is to identify the research gaps in the process parameters of ultrasonic consolidation.

Keywords

Citation

Ishfaq, K., Abas, Z., Saravana Kumar, M. and Mahmood, M.A. (2023), "Review of recent trends in ultrasonic additive manufacturing: current challenges and future prospects", Rapid Prototyping Journal, Vol. 29 No. 6, pp. 1195-1211. https://doi.org/10.1108/RPJ-09-2022-0300

Publisher

:

Emerald Publishing Limited

Copyright © 2022, Emerald Publishing Limited

Related articles