Multi-material distribution planning for additive manufacturing of biomimetic structures

Abstract

Purpose

The purpose of this study is to develop a novel approach to designing locally programmed multi-material distribution in a three-dimensional (3D) model, with the goal of producing a biomimetic robot that could mimic the locomotion of living organisms.

Design/methodology/approach

A voxelized representation is used to design the multi-material digital model and the material distribution in the model is optimized with the aims of mimicking the deflection dynamics of a real-life biological structure (i.e. inchworms) during its locomotion and achieving smooth deflection between adjacent regions. The design is validated post-fabrication by comparing the bending profiles of the printed robot with the deflection reference images of the real-life organism.

Findings

The proposed design framework in this study provides a foundation for multi-material multi-functional design for biomimicry and a wide range of applications in the manufacturing field and many other fields such as robotics and biomedical fields. The final optimized material design was 3D printed using a novel multi-material additive manufacturing method, magnetic field-assisted projection stereolithography. From the experimental tests, it was observed that the deflection curve and the deflection gradient of the printed robot within the adjacent regions of the body agreed well with the profiles taken from the real-life inchworm.

Originality/value

This paper presents a voxelized digital representation of the material distribution in printed parts, allowing spatially varied programming of material properties. The incorporation of reference images from living organisms into the design approach is a novel approach to transform image domain knowledge into the domain of engineering mechanical and material properties. Furthermore, the novel multi-material distribution design approach was validated through designing, 3D printing and prototyping an inchworm-inspired soft robot, which showed superior locomotion capability by mimicking the observed locomotion of the real inchworm.

Citation

Joyee, E.B., Huang, J., Lichade, K.M. and Pan, Y. (2021), "Multi-material distribution planning for additive manufacturing of biomimetic structures", Rapid Prototyping Journal, Vol. 27 No. 10, pp. 1917-1927. https://doi.org/10.1108/RPJ-08-2020-0202