Polygonal model based cutter location data generation with offset error compensation

Abstract

Purpose

As manufacturing technology has developed, digital models from advanced measuring devices have been widely used in manufacturing sectors. To speed up the production cycle and reduce extra errors introduced in surface reconstruction processes, directly machining digital models in the polygonal stereolithographyformat has been considered as an effective approach in rapid digital manufacturing. In machining processes, Cutter Location (CL) data for numerical control (NC) machining is generated usually from an offset model. This model is created by offsetting each vertex of the original model along its vertex vector. However, this method has the drawback of overcut to the offset model. The purpose of this paper is to solve the overcut problem through an error compensation algorithm to the vertex offset model.

Design/methodology/approach

Based on the analysis of the vertex offset method and the offset model generated, the authors developed and implemented an error compensation method to correct the offset models and generated the accurate CL data for the subsequent machining process. This error compensation method is verified through three polygonal models and the tool paths generated were used for a real part machining.

Findings

Based on the analysis of the vertex offset method and the offset model generated, the authors developed an error compensation method to correct the offset models and generated the accurate CL data for the subsequent machining process. The developed error compensation algorithm can effectively solve the overcut drawback of the vertex offset method.

Research limitations/implications

The error compensation method to the vertex offset model is used for generating the CL data with the using of a ball-end cutter.

Practical implications

On the study of CL data generation for a STL model, most of the current studies are focused on the determination of the offset vectors of the vertexes. The offset distance is usually fixed to the radius of the cutter used. Thus, the overcut problem to the offset model is inevitable and has not been much studied. The authors propose an effective approach to compensate the insufficient distance of the offset vertex and solve the overcut problem.

Social implications

The directly tool paths generation from a STL model can reduce the error of surface reconstruction and speed up the machining progress.

Originality/value

The authors investigate the overcut problem occurred in vertex offset for CL data generation and present a new error compensation algorithm for generating the CL data that can effectively solve the overcut problem.

Citation

Wen, H., Gao, J. and Chen, X. (2016), "Polygonal model based cutter location data generation with offset error compensation", Rapid Prototyping Journal, Vol. 22 No. 3, pp. 559-568. https://doi.org/10.1108/RPJ-01-2015-0001