To read this content please select one of the options below:

LIDAR-based SLAM system for autonomous vehicles in degraded point cloud scenarios: dynamic obstacle removal

Qihua Ma (School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai, China)
Qilin Li (School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai, China)
Wenchao Wang (School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai, China)
Meng Zhu (School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai, China)

Industrial Robot

ISSN: 0143-991X

Article publication date: 10 April 2024

Issue publication date: 2 July 2024

151

Abstract

Purpose

This study aims to achieve superior localization and mapping performance in point cloud degradation scenarios through the effective removal of dynamic obstacles. With the continuous development of various technologies for autonomous vehicles, the LIDAR-based Simultaneous localization and mapping (SLAM) system is becoming increasingly important. However, in SLAM systems, effectively addressing the challenges of point cloud degradation scenarios is essential for accurate localization and mapping, with dynamic obstacle removal being a key component.

Design/methodology/approach

This paper proposes a method that combines adaptive feature extraction and loop closure detection algorithms to address this challenge. In the SLAM system, the ground point cloud and non-ground point cloud are separated to reduce the impact of noise. And based on the cylindrical projection image of the point cloud, the intensity features are adaptively extracted, the degradation direction is determined by the degradation factor and the intensity features are matched with the map to correct the degraded pose. Moreover, through the difference in raster distribution of the point clouds before and after two frames in the loop process, the dynamic point clouds are identified and removed, and the map is updated.

Findings

Experimental results show that the method has good performance. The absolute displacement accuracy of the laser odometer is improved by 27.1%, the relative displacement accuracy is improved by 33.5% and the relative angle accuracy is improved by 23.8% after using the adaptive intensity feature extraction method. The position error is reduced by 30% after removing the dynamic target.

Originality/value

Compared with LiDAR odometry and mapping algorithm, the method has greater robustness and accuracy in mapping and localization.

Keywords

Citation

Ma, Q., Li, Q., Wang, W. and Zhu, M. (2024), "LIDAR-based SLAM system for autonomous vehicles in degraded point cloud scenarios: dynamic obstacle removal", Industrial Robot, Vol. 51 No. 4, pp. 632-639. https://doi.org/10.1108/IR-01-2024-0001

Publisher

:

Emerald Publishing Limited

Copyright © 2024, Emerald Publishing Limited

Related articles