Triangular cyclic accelerated degradation zero-failure test plan

Abstract

Purpose

Zero-failure reliability testing aims at demonstrating whether the product has achieved the desired reliability target with zero failure and high confidence level at a given time. Incorporating accelerated degradation testing in zero-failure reliability demonstration test (RDT) facilitates early failure in high reliability items developed within short period of time to be able to survive in fiercely competitive market. The paper aims to discuss these issues.

Design/methodology/approach

The triangular cyclic stress uses one test chamber thus saving experimental cost. The parameters in model are estimated using maximum likelihood methods. The optimum plan consists in finding out optimum number of cycles, optimum specimens, optimum stress change point(s) and optimum stress rates.

Findings

The optimum plan consists in finding out optimum number of cycles, optimum specimens, optimum stress change point(s) and optimum stress rates by minimizing asymptotic variance of estimate of quantile of the lifetime distribution at use condition subject to the constraint that total testing or experimental cost does not exceed a pre-specified budget. Confidence intervals of the design parameters have been obtained and sensitivity analysis carried out. The results of sensitivity analysis show that the plan is robust to small deviations from the true values of baseline parameters.

Originality/value

For some highly reliable products, even accelerated life testing yields little failure data of units in a feasible amount of time. In such cases accelerated degradation testing is carried out, wherein the failure termed as soft failure is defined in terms of performance characteristic of the product exceeding its critical (threshold) value.

Citation

Srivastava, P.W. and Manisha, M. (2019), "Triangular cyclic accelerated degradation zero-failure test plan", International Journal of Quality & Reliability Management, Vol. 36 No. 3, pp. 358-377. https://doi.org/10.1108/IJQRM-03-2017-0040