Study on textile assemblies with aluminized basalt fabrics destined for protective gloves
International Journal of Clothing Science and Technology
ISSN: 0955-6222
Article publication date: 7 September 2015
Abstract
Purpose
The purpose of this paper is to check an applicability of aluminized basalt fabrics for production of gloves protecting simultaneously against thermal and mechanical factors.
Design/methodology/approach
Six variants of protective gloves were manufactured using two different glove constructions: more simple and cheaper with the anatomical thumb arrangement (model A), and more ergonomic one with so called “distance gussets” (model B). Aluminized basalt fabrics were contained in the back side of all variants and in only one variant of palm side. Then the protective properties against thermal and mechanical factors were measured according to the up-to-date standards.
Findings
The fulfillment of contact heat requirement was achieved for all glove variants at 100°C. Application of aluminized basalt fabrics in the glove back side allowed obtaining the fourth performance level in the case of resistance to small metal splashes and assuring the highest protection against the radiant heat and small metal splashes. Fulfillment of standard requirements for all examined mechanical parameters was achieved and significantly higher values than reqired for the highest performance level were registered.
Research limitations/implications
The further research including upscalling strategy as well as industrial conditions requirements should be taking into account for basalt textiles development. Moreover functionalization of basalt yarns and fabrics seems to be promising feature.
Practical implications
The preliminary utility trials were done and registered results are very promising, shows that this kind of gloves will be cheaper than produced so far and could be used in the glass, welder companies.
Social implications
The basalt textiles applied for protective gloves or other personal protective equipment can ensure safety at work for end users operating in mechanical and thermal risk scenarios.
Originality/value
Up till now the basalt fabrics have not been recognized as a material for the personal protective equipment, they were used mostly for technical purposes.
Keywords
Acknowledgements
This research was partially supported by the Ministry of Science and Higher Education, Poland (project EUREKA No E! 4505).
Citation
Hrynyk, R. and Frydrych, I. (2015), "Study on textile assemblies with aluminized basalt fabrics destined for protective gloves", International Journal of Clothing Science and Technology, Vol. 27 No. 5, pp. 705-719. https://doi.org/10.1108/IJCST-09-2014-0112
Publisher
:Emerald Group Publishing Limited
Copyright © 2015, Emerald Group Publishing Limited