Influence of the delamination loading velocity on textile bonds and sewn seams strength

Abstract

Purpose

The purpose of this paper is to determine the influence of the loading velocity on textile bonds and sewn seam strength.

Design/methodology/approach

Commercially produced polyamide and polyester knitted fabric, and polyester woven fabrics as well as three commercially available monolayer urethane thermoplastic films were used in this research. Two layers of each fabric were laminated at 160°C temperature at 5.6 kPa for 20 seconds. Sewn specimens were joined applying (301) and (514) stiches for woven and knitted fabrics, respectively. The bond and sewn seam strength was investigated at different delamination loading velocities (50, 100, 150, 200, 300 mm/min). These values of velocities lies in the velocity interval which covers the different standard requirements for testing of the quality of textiles and their seams or were applied in the research works of previous scientists. As the influence of loading velocity was more significant for bond strength, the bond strength results were analyzed together with the analysis of bond rupture character.

Findings

The determined influence of the loading velocity on textile bonds strength has proved that the loading velocity in bond strength test is of high importance for the prediction of the behavior of clothing being in exploitation under different conditions. The opposite tendency was determined for the sewn seams, the strength of which was independent on loading velocity.

Originality/value

The influence of the loading velocity on textile bond and sewn seam strength was not analyzed in the previous research works published by other scientists. It was known that the standard velocity is 50 mm/min for seams and 100 mm/min for textiles strength testing. It was shown there that the real exploitation of a garment as a whole complicated heterogenic dynamic system could be simulated with changing loading velocities during their seam strength testing. It was also determined that the loading velocity makes different influence on bonded and sewn seams of textiles.

Citation

Mikalauskaite, G. and Daukantiene, V. (2017), "Influence of the delamination loading velocity on textile bonds and sewn seams strength", International Journal of Clothing Science and Technology, Vol. 29 No. 6, pp. 768-775. https://doi.org/10.1108/IJCST-02-2017-0012