Toward the implementation of a multi-component framework in a density-based flow solver for handling chemically reacting flows

Abstract

Purpose

The purpose of this study is to present and demonstrate a numerical method for solving chemically reacting flows. These are important for energy conversion devices, which rely on chemical reactions as their operational mechanism, with heat generated from the combustion of the fuel, often gases, being converted to work.

Design/methodology/approach

The numerical study of such flows requires the set of Navier-Stokes equations to be extended to include multiple species and the chemical reactions between them. The numerical method implemented in this study also accounts for changes in the material properties because of temperature variations and the process to handle steep spatial fronts and stiff source terms without incurring any numerical instabilities. An all-speed numerical framework is used through simple low-dissipation advection upwind splitting (SLAU) convective scheme, and it has been extended in a multi-component species framework on the in-house density-based flow solver. The capability of solving turbulent combustion is also implemented using the Eddy Dissipation Concept (EDC) framework and the recent k-kl turbulence model.

Findings

The numerical implementation has been demonstrated for several stiff problems in laminar and turbulent combustion. The laminar combustion results are compared from the corresponding results from the Cantera library, and the turbulent combustion computations are found to be consistent with the experimental results.

Originality/value

This paper has extended the single gas density-based framework to handle multi-component gaseous mixtures. This paper has demonstrated the capability of the numerical framework for solving non-reacting/reacting laminar and turbulent flow problems. The all-speed SLAU convective scheme has been extended in the multi-component species framework, and the turbulent model k-kl is used for turbulent combustion, which has not been done previously. While the former method provides the capability of solving for low-speed flows using the density-based method, the later is a length-scale-based method that includes scale-adaptive simulation characteristics in the turbulence modeling. The SLAU scheme has proven to work well for unsteady flows while the k-kL model works well in non-stationary turbulent flows. As both these flow features are commonly found in industrially important reacting flows, the convection scheme and the turbulence model together will enhance the numerical predictions of such flows.

Citation

Kalkote, N., Assam, A. and Eswaran, V. (2021), "Toward the implementation of a multi-component framework in a density-based flow solver for handling chemically reacting flows", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 31 No. 10, pp. 3169-3195. https://doi.org/10.1108/HFF-11-2019-0860