To read this content please select one of the options below:

LES-based simulation of the time-resolved flow for rotor-stator interactions in axial fan stages

Jesús Manuel Fernandez Oro (Fluid Mechanics Group, University of Oviedo, Gijón, Spain)
Andrés Meana-Fernández (Department of Energy - Fluid Mechanics, University of Oviedo, Gijón, Spain)
Monica Galdo Vega (Department of Energy, University of Oviedo, Gijón, Spain)
Bruno Pereiras (Department of Energy, University of Oviedo, Gijón, Spain)
José González Pérez (Fluid Mechanics Group, University of Oviedo, Gijón, Spain)

International Journal of Numerical Methods for Heat & Fluid Flow

ISSN: 0961-5539

Article publication date: 30 October 2018

Issue publication date: 8 February 2019

225

Abstract

Purpose

The purpose of this paper is the development of a CFD methodology based on LES computations to analyze the rotor–stator interaction in an axial fan stage.

Design/methodology/approach

A wall-modeled large eddy simulation (WMLES) has been performed for a spanwise 3D extrusion of the central section of the fan stage. Computations were performed for three different operating conditions, from nominal (Q_N) to off-design (85 per cent Q_N and 70 per cent Q_N) working points. Circumferential periodic conditions were introduced to reduce the extent of the computational domain. The post-processing procedure enabled the segregation of unsteady deterministic features and turbulent scales. The simulations were experimentally validated using wake profiles and turbulent scales obtained from hot-wire measurements.

Findings

The transport of rotor wakes and both wake–vane and wake–wake interactions in the stator flow field have been analyzed. The description of flow separation, particularly at off-design conditions, is fully benefited from the LES performance. Rotor wakes impinging on the stator vanes generate a coherent large-scale vortex shedding at reduced frequencies. Large pressure fluctuations in the stagnation region on the leading edge of the vanes have been found.

Research limitations/implications

LES simulations have shown to be appropriate for the assessment of the design of an axial fan, especially for specific operating conditions for which a URANS model presents a lower performance for turbulence description.

Originality/value

This paper describes the development of an LES-based simulation to understand the flow mechanisms related to the rotor–stator interaction in axial fan stages.

Keywords

Acknowledgements

This work has been supported by the “FPU” predoctoral research scholarship provided by the Spanish Ministry of Education, Culture and Sports.

Citation

Fernandez Oro, J.M., Meana-Fernández, A., Galdo Vega, M., Pereiras, B. and González Pérez, J. (2019), "LES-based simulation of the time-resolved flow for rotor-stator interactions in axial fan stages", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 29 No. 2, pp. 657-681. https://doi.org/10.1108/HFF-10-2017-0421

Publisher

:

Emerald Publishing Limited

Copyright © 2018, Emerald Publishing Limited

Related articles