The convection of a Bingham fluid in a differentially-heated porous cavity
International Journal of Numerical Methods for Heat & Fluid Flow
ISSN: 0961-5539
Article publication date: 3 May 2016
Abstract
Purpose
The purpose of this paper is to determine the manner in which a yield stress fluid begins convecting when it saturates a porous medium. A sidewall-heated rectangular cavity is selected as the testbed for this pioneering work.
Design/methodology/approach
Steady solutions are obtained using a second order accurate finite difference method, line relaxation based on the Gauss-Seidel smoother, a Full Approximation Scheme multigrid algorithm with V-cycling and a regularization of the Darcy-Bingham model to smooth the piecewise linear relation between the Darcy flux and the applied body forces.
Findings
While Newtonian fluids always convect whenever the Darcy-Rayleigh number is nonzero, Bingham fluids are found to convect only when the Darcy-Rayleigh number exceeds a value which is linearly dependent on both the Rees-Bingham number and the overall perimeter of the rectangular cavity. Stagnation is always found in the centre of the cavity and in regions close to the four corners. Care must be taken over the selection of the regularization constant.
Research limitations/implications
The Darcy-Rayleigh number is restricted to values which are at or below 200.
Originality/value
This is the first investigation of the effect of yield stress on nonlinear convection in porous media.
Keywords
Acknowledgements
The author would like to thank the reviewers for the time taken to report on the present paper. This is gratefully appreciated.
Citation
Rees, D.A.S. (2016), "The convection of a Bingham fluid in a differentially-heated porous cavity", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 26 No. 3/4, pp. 879-896. https://doi.org/10.1108/HFF-09-2015-0383
Publisher
:Emerald Group Publishing Limited
Copyright © 2016, Emerald Group Publishing Limited