Poly(4‐vinylpyridine) and poly(4‐vinylpyridine poly‐3‐oxide ethylene) as corrosion inhibitors for Cu60‐Zn40 in 0.5M HNO₃

Abstract

The effects of the addition of poly(4‐vinylpyridine) (P4VP) and its derivative poly(4‐vinylpyridine poly‐3‐oxide ethylene) (P4VPPOE) on the corrosion of Cu60‐Zn40 in 0.5M HNO₃ have been investigated by potentiodynamic and weight loss measurements. Both of the studied polymers decrease the corrosion rate. Their inhibition efficiency (E%) increases with the concentration. The maximum of inhibition was obtained for P4VPPOE (100 per cent at 10^–5M). E% obtained from cathodic Tafel plots and weight loss methods were in good agreement. The inhibitors were adsorbed on the Cu60‐Zn40 surface according to the Frumkin adsorption isotherm model. P4VPPOE acts as a cathodic inhibitor and its efficiency is temperature independent.

Citation

Abed, Y., Arrar, Z., Hammouti, B., Taleb, M., Kertit, S. and Mansri, A. (2001), "Poly(4‐vinylpyridine) and poly(4‐vinylpyridine poly‐3‐oxide ethylene) as corrosion inhibitors for Cu60‐Zn40 in 0.5M HNO₃", Anti-Corrosion Methods and Materials, Vol. 48 No. 5, pp. 304-308. https://doi.org/10.1108/EUM0000000005882