An efficient coupled pressure–velocity solver for three-dimensional injection molding simulation using Schur complement preconditioned FGMRES

Abstract

Purpose

The purpose of this paper is to develop a coupled approach to solve the pressure–velocity-coupled problem efficiently in the three-dimensional injection molding simulation.

Design/methodology/approach

A fully coupled pressure–velocity algorithm is developed to solve the coupled problem, by treating the pressure gradient term implicitly. And, the Schur complement preconditioned FGMRES is applied to decompose the resulting coupled pressure–velocity equation into pressure and velocity subsystems. Then, BoomerAMG is adopted to solve the pressure subsystem, and block Jacobi preconditioned FGMRES is applied to the velocity subsystem.

Findings

According to the several experiments, the fully coupled pressure–velocity algorithm was demonstrated to have faster convergence than the traditional SIMPLE algorithm, and the calculating time was reduced by up to 70 per cent. And, the Schur complement preconditioned FGMRES worked more efficiently than block Gauss–Seidel preconditioned FGMRES, block-selective AMG and AMG with block ILU(0) smoother and could take at least 47.4 per cent less time. The proposed solver had good scalability for different-size problems, including various cases with different numbers of elements. It also kept good speedup and efficiency in parallel performance.

Originality/value

A coupled solver has been proposed to effectively solve the coupled problem in the three-dimensional injection molding simulation, which is more robust and efficient than existing methods.

Citation

Liu, X., Guo, F., Zhang, Y., Liang, J., Li, D. and Zhou, H. (2019), "An efficient coupled pressure–velocity solver for three-dimensional injection molding simulation using Schur complement preconditioned FGMRES", Engineering Computations, Vol. 36 No. 4, pp. 1101-1120. https://doi.org/10.1108/EC-10-2018-0469