Nonlinear magnetic equivalent circuit of the hybrid magnetic bearing

Abstract

Purpose

The purpose of this paper is to create a reliable nonlinear magnetic equivalent circuit (NMEC) of the hybrid magnetic bearing (HMB). Commonly used magnetic equivalent circuits of HMB omit a saturation effect of the magnetic material as well as the leakage and fringing flux. It results in imprecise modelling of the magnetic field distribution. On the other hand, only 3D finite element analysis (FEA) can be used to precisely simulate the magnetic field in this type of the magnetic bearing. The proposed NMEC incorporates the saturation effect of the magnetic material, as well as the leakage and fringing flux.

Design/methodology/approach

The magnetic equivalent circuit of presented HMB is proposed to obtain a reliable model that ensures short calculation time. Developed NMEC incorporates the phenomena as the saturation effect, as well as the leakage and fringing flux. The reluctance of the air gap that includes the fringing flux was calculated using 3D FEA. Kirchhoffs’ laws were used to create a set of nonlinear equations that were iteratively solved by Broyden’s method.

Findings

Incorporating into NMEC of the HMB a saturation effect of the magnetic material, as well as the leakage and fringing flux, resulted in the accurate model that was in good agreement with 3 D finite element model and the real object. The developed NMEC offers the calculation time in the range of miliseconds, therefore can be successfully used in the engineering design instead of the FEM.

Originality/value

Presented NMEC can be considered as a fundamental model that can be successfully used for accurate and fast simulation of the HMB. Proposed NMEC includes considerable factors that decide about the model accuracy such as the saturation effect of the ferromagnetic material and the leakage and fringing flux. The developed NMEC can be used in the optimization procedures and for simulations of dynamic responses.

Citation

Wajnert, D. and Tomczuk, B. (2019), "Nonlinear magnetic equivalent circuit of the hybrid magnetic bearing", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 38 No. 4, pp. 1190-1203. https://doi.org/10.1108/COMPEL-10-2018-0423