A new optimal design of surface mounted permanent magnet synchronous motors with integral slot per pole

Abstract

Purpose

The purpose of this paper is to present a new optimal design for integral slot permanent magnet synchronous motors (PMSMs) to shape the air-gap magnetic field in sinusoidal and to reduce the cogging torque, simultaneously.

Design/methodology/approach

For obtaining this new optimal design, the influence of different magnetizations of permanent magnets (PMs), including radial, parallel and halbach magnetization is investigated on the performance of one typical PMSM by using the conformal mapping (CM) method. To reduce the cogging torque even more, the technique of slot opening shift is also implemented on the stator slots of analyzed PMSM without reduction in the main performance, including the air-gap magnetic field, the average torque and back-electromotive force (back-EMF).

Findings

Finally, an optimal configuration including the Hat-type magnet poles with halbach magnetization on the rotor and shifted slot openings on the stator is obtained through the CM method, which shows the main reduction in cogging torque and the harmonic content of air-gap magnetic field.

Practical implications

The obtained optimal design is completely practical and is validated by comparing with the corresponding results obtained through finite element method.

Originality/value

This paper presents a new optimal design for integral slot PMSMs, which can include different design considerations, such as the reduction of cogging torque and the total harmonic distortion of air-gap magnetic field by using the CM method.

Citation

Rezaeealam, B. and Rezaee-Alam, F. (2018), "A new optimal design of surface mounted permanent magnet synchronous motors with integral slot per pole", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 37 No. 1, pp. 136-152. https://doi.org/10.1108/COMPEL-01-2017-0009