Corrosion control of rusted carbon steel using hexametaphosphate and zinc sulfate in RO product water

Abstract

Purpose

The purpose of this investigation was to study the effects of sodium hexametaphosphate and zinc sulfate on the corrosion control of rusted iron in reverse osmosis (RO) product water of seawater.

Design/methodology/approach

The synergistic effects and inhibition effects of corrosion inhibitors on rusted carbon steel were studied using the weight-loss method, electrochemical tests and surface analysis techniques.

Findings

The results indicated that sodium hexametaphosphate could partly suppress the corrosion of rusted steel, but zinc sulfate used alone had no inhibition effect. Hexametaphosphate and zinc sulfate showed a strong synergistic effect and the optimal ratio of two chemicals was 1:1. The inhibition efficiency appeared to increase with increasing inhibitor concentration and the ideal dosage of inhibitors was set at 20 mg/L, when chemical cost and inhibition efficiency were taken into account. Surface analysis results proved that this compound inhibitor could make the rust layer much more compact. The inhibitive mechanism was to combine with rust and form a protective film, which consisted of iron oxide, polyphosphate and Zn(OH)₂.

Originality/value

It was found that the compound inhibitor consisting of sodium hexametaphosphate and zinc sulfate had a good inhibitive effect on rusted iron in RO product water. The research results can provide theoretical guidelines for corrosion control of rusted pipes in power plants.

Citation

Hu, J., Cao, S., Xie, J. and Yin, L. (2014), "Corrosion control of rusted carbon steel using hexametaphosphate and zinc sulfate in RO product water", Anti-Corrosion Methods and Materials, Vol. 61 No. 2, pp. 65-71. https://doi.org/10.1108/ACMM-03-2013-1245