To read this content please select one of the options below:

Characterization and modelling of miniature ferrite transformer for high frequency applications

Mirjana S. Damnjanović (Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia)
Ljiljana D. Živanov (Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia)
Snezana M. Djurić (Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia)
Andrea M. Marić (Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia)
Aleksandar B. Menićanin (Institute for Multidisciplinary Research, University of Belgrade, Belgrade, Serbia)
Goran J. Radosavljević (Institute of Sensor and Actuator Systems, Vienna University of Technology, Vienna, Austria)
Nelu V. Blaž (Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia)

Microelectronics International

ISSN: 1356-5362

Article publication date: 4 May 2012

398

Abstract

Purpose

Significant achievements in ferrite material processing enable developments of many ferrite devices with a wide range of power levels and working frequencies, which make demands for new characterization and modelling methods for ferrite materials and components. The purpose of this paper is to introduce a modelling and measurement procedure, which can be used for the characterization of two‐port ferrite components in high frequency range.

Design/methodology/approach

This paper presents a commercially available ferrite component (transformer) modelling and determination of its electrical parameters using in‐house developed software. The components are measured and characterized using a vector network analyzer E5071B and adaptation test fixture on PCB board. The parameters of electrical equivalent circuit of the ferrite transformer parameters are compared with values extracted out of measured scattering parameters.

Findings

A good agreement between modelled and extracted electrical parameters of the ferrite transformer is found. The modelled inductance curves have the same dependence versus frequency as extracted ones. That confirms the model validity in the wide frequency range.

Originality/value

In‐house developed software based on proposed model provides inclusion of the ferrite material dispersive characteristics, which dominantly determines high‐frequency behaviour of two‐port ferrite components. Developed software enables fast and accurate calculation of the ferrite transformer electrical parameters and its redesign in order to achieve the best performance for required application.

Keywords

Citation

Damnjanović, M.S., Živanov, L.D., Djurić, S.M., Marić, A.M., Menićanin, A.B., Radosavljević, G.J. and Blaž, N.V. (2012), "Characterization and modelling of miniature ferrite transformer for high frequency applications", Microelectronics International, Vol. 29 No. 2, pp. 83-89. https://doi.org/10.1108/13565361211237671

Publisher

:

Emerald Group Publishing Limited

Copyright © 2012, Emerald Group Publishing Limited

Related articles