To read this content please select one of the options below:

Thick film symmetrical EMI LC cells

O. Aleksić (Faculty of Electrical Engineering, Belgrade, Belgrade University, Yugoslavia)
V. Desnica (Faculty of Technical Sciences, Novi Sad, University of Novi Sad, Yugoslavia)
M. Luković (Faculty of Electrical Engineering, Belgrade, Belgrade University, Yugoslavia)
Lj.D. Živanov (Faculty of Technical Sciences, Novi Sad, University of Novi Sad, Yugoslavia)

Microelectronics International

ISSN: 1356-5362

Article publication date: 1 August 2002

157

Abstract

Thick film symmetrical LC cells with two pairs of terminations were printed on alumina using PdAg paste and crossover dielectric. Planar inductors such as meander, spiral, bispiral, and solenoid in plane were distributed over planar capacitors such as sandwich, interdigitated and segmented. Attenu‐ation and Smith charts of symmetrical EMI LC cells were measured on network analyzer in the range of 1 MHz to 3 GHz. Two or three main LC cells were joined in series to sum attenuation. The obtained results were compared mutually, at first, and than with the cubic (chip) EMI LC filters. The obtained EMI noise suppression was similar, but the filter band of thick film LC cells was much wider.

Keywords

Citation

Aleksić, O., Desnica, V., Luković, M. and Živanov, L.D. (2002), "Thick film symmetrical EMI LC cells", Microelectronics International, Vol. 19 No. 2, pp. 19-25. https://doi.org/10.1108/13565360210427852

Publisher

:

MCB UP Ltd

Copyright © 2002, MCB UP Limited

Related articles