A finish machining strategy for rapid manufactured parts and tools

Abstract

Rapid prototyping (RP) techniques are being increasingly used to manufacture injection molding and die casting core and cavity sets, known as tools, and for other tooling‐related parts, such as EDM electrodes. This paper presents a STL‐based finish machining technique for tools and parts made using RP techniques in order to achieve the tight tolerance and surface finish requirements necessary for tooling applications. Rotate, scale, translate and offset algorithms are used to pre‐process the 3D model prior to its manufacture. A machining strategy of adaptive raster milling of the surface, plus hole drilling and sharp edge contour machining, is developed to finish the parts and tools after fabrication using RP. Finally, a benchmark part was designed and fabricated using the above‐mentioned strategies and the results show the effectiveness of the developed software.

Citation

Stucker, B. and Qu, X. (2003), "A finish machining strategy for rapid manufactured parts and tools", Rapid Prototyping Journal, Vol. 9 No. 4, pp. 194-200. https://doi.org/10.1108/13552540310489578