Experiments on the extraction of blade vibration signature from the shaft torsional vibration signals

Abstract

This paper presents experiment results that examine the validity of extracting blade vibration signature from the shaft torsional vibration signals. A special test rig was designed and manufactured for this objective. A set of strain gages were bonded to the shaft and to the blades to measure the shaft twisting and blade bending deformations respectively. A controlled frequency exciter excited the blade vibration. The shaft torsional and blade bending vibration signals were simultaneously recorded and presented in the time and frequency domains. The blade bending vibration frequencies appeared dominantly in the shaft torsional vibration signals for all blade vibration frequencies up to 100Hz. For frequencies higher than 100Hz, less sensitivity of the torsional vibration to blade vibration was observed.

Citation

Al‐Bedoor, B.O., Ghouti, L., Adewusi, S.A., Al‐Nassar, Y. and Abdlsamad, M. (2003), "Experiments on the extraction of blade vibration signature from the shaft torsional vibration signals", Journal of Quality in Maintenance Engineering, Vol. 9 No. 2, pp. 144-159. https://doi.org/10.1108/13552510310482398