The interrelationship between fabric crease recovery and pressing performance
International Journal of Clothing Science and Technology
ISSN: 0955-6222
Article publication date: 1 October 2001
Abstract
Creases are marks that are created and left in a fabric during garment wear. Pressing is a process to flatten garment panels and sharpen garment edges and pleats. To minimize crease, the fabric should recover after pressing without creating a creased edge. Whereas, good pressing performance means the creased edge stays sharp after pressing. Good crease recovery and pressing performance appear contradictory. However, crease recovery and pressing performance are different as creases are formed during wear and pressing is carried out using pressing equipment such as iron, pressing machines, etc. The condition, i.e. temperature and humidity, under which the creases are formed in wear and pressing are very different. The latter has much higher temperature, pressure and humidity. This paper reports on an experimental investigation on the relationship between the crease recovery and pressing performance of wool and other fabrics. It was found that there are only generally weak to moderate relationships between the crease recovery as measured by the Shirley Crease Recovery Tester and the pressing performance as measured by the Siro‐Press Tester. The characteristics of wool fabrics, which have both good crease recovery and pressing performance, are identified. This study is a step towards fabric engineering.
Keywords
Citation
Fan, J. (2001), "The interrelationship between fabric crease recovery and pressing performance", International Journal of Clothing Science and Technology, Vol. 13 No. 5, pp. 368-375. https://doi.org/10.1108/09556220110405127
Publisher
:MCB UP Ltd
Copyright © 2001, MCB UP Limited