TESTCASE: a benchmark problem for coupled field‐circuit simulations
ISSN: 0332-1649
Article publication date: 8 May 2009
Abstract
Purpose
The purpose of this paper is to present an experimental setup for the verification of coupled electromagnetic field‐circuit simulation, called TESTCASE. By means of simple and well‐defined geometries, the comparison of different coupling approaches among each other and with measurements should be possible.
Design/methodology/approach
The physical setup consists of a C‐core in conjunction with a reluctance rotor. The TESTCASE is designed to work in static operation and with motion induced voltage.
Findings
Simulation results using different approaches as well as measurement results are presented. Practical issues in measurement and simulation are discussed. It was found that particular care has to be taken concerning the modeling of the air around the TESTCASE structure.
Originality/value
With the proposed approach, it is possible to evaluate the coupled field circuit problem on a defined and well‐known geometry. Simulation results can be compared to measurements.
Keywords
Citation
van der Giet, M., Lange, E. and Hameyer, K. (2009), "TESTCASE: a benchmark problem for coupled field‐circuit simulations", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 28 No. 3, pp. 668-681. https://doi.org/10.1108/03321640910940927
Publisher
:Emerald Group Publishing Limited
Copyright © 2009, Emerald Group Publishing Limited