Real‐time image capturing and processing of seam and pool during robotic welding process

Abstract

Purpose

The purpose of this paper is to analyze the technology of capturing and processing weld images in real‐time, which is very important to the seam tracking and the weld quality control during the robotic gas tungsten arc welding (GTAW) process.

Design/methodology/approach

By analyzing some main parameters on the effect of image capturing, a passive vision sensor for welding robot was designed in order to capture clear and steady welding images. Based on the analysis of the characteristic of the welding images, a new improved Canny algorithm was proposed to detect the edges of seam and pool, and extract the seam and pool characteristic parameters. Finally, the image processing precision was verified by the random welding experiments.

Findings

It was found that the seam and pool images can be clearly acquired by using the passive vision system, and the welding image characteristic parameters were accurately extracted through processing. The experiment results show that the precision range of the image processing can be controlled about within ±0.169 mm, which can completely meet the requirement of real‐time seam tracking for welding robot.

Research limitations/implications

This system will be applied to the industrial welding robot production during the GTAW process.

Originality/value

It is very important for the type of teaching‐playback robots with the passive vision that the real‐time images of seam and pool are acquired clearly and processed accurately during the robotic welding process, which helps determine follow‐up seam track and the control of welding quality.

Citation

Xu, Y., Yu, H., Zhong, J., Lin, T. and Chen, S. (2012), "Real‐time image capturing and processing of seam and pool during robotic welding process", Industrial Robot, Vol. 39 No. 5, pp. 513-523. https://doi.org/10.1108/01439911211249805