To read this content please select one of the options below:

AirEOD

Rezia Molfino (DIMEC‐PMAR, Department of Mechanics and Machine Design, University of Genova, Genova, Italy)
Sandro Costo (DIMEC‐PMAR, Department of Mechanics and Machine Design, University of Genova, Genova, Italy)
Francesco Cepolina (DIMEC‐PMAR, Department of Mechanics and Machine Design, University of Genova, Genova, Italy)
Matteo Zoppi (DIMEC‐PMAR, Department of Mechanics and Machine Design, University of Genova, Genova, Italy)

Industrial Robot

ISSN: 0143-991X

Article publication date: 1 May 2006

432

Abstract

Purpose

To present a new special explosive ordnance disposal (EOD) robot designed to operate onboard airplanes.

Design/methodology/approach

The design approach adopted is multidisciplinary: mechanical and control architectures are conceived simultaneously. Modularity and lifecycle are considered. Motion and EOD tasks are controlled in tele‐operation.

Findings

A new EOD robot was designed in detail and it is ready to be built. A dynamic simulator has been written and set‐up, including a virtual reality module. The simulator is used to define the control logics. Simulation results are satisfactory. The simulator can be used as a training platform for the bomb squads.

Research limitations/implications

The intent to keep the cost of the robot low conditioned the selection of the materials. Only aluminium and standard composites (like carbon fibers composites) have been used. A higher degree of freedom of the arm could increase the usability of the system; to limit the cost, the degree of freedom was limited to seven. A decision support system based on an expert system interfaced with the simulator could improve the performance of the system.

Practical implications

A new EOD robot will be built and commercialised soon by the industrial partner Ansaldo Ricerche.

Originality/value

The EOD robots available for use inside aircrafts are discussed. A new system named AirEOD is presented, including mobile platform, dexterous arm and all related design and control issues.

Keywords

Citation

Molfino, R., Costo, S., Cepolina, F. and Zoppi, M. (2006), "AirEOD", Industrial Robot, Vol. 33 No. 3, pp. 228-235. https://doi.org/10.1108/01439910610659132

Publisher

:

Emerald Group Publishing Limited

Copyright © 2006, Emerald Group Publishing Limited

Related articles