To read this content please select one of the options below:

A variable cycle jet engine for ASTOVL aircraft

Alan Wood (School of Mechanical Engineering, Cranfield University, Cranfield, UK)
Pericles Pilidis (School of Mechanical Engineering, Cranfield University, Cranfield, UK)

Aircraft Engineering and Aerospace Technology

ISSN: 0002-2667

Article publication date: 1 December 1997

3609

Abstract

Describes a novel concept in aircraft propulsion: investigates a variable cycle jet engine for a supersonic advanced short take‐off vertical landing (ASTOVL) aircraft. The engine is the selective bleed turbofan. The selective bleed turbofan is a two shaft, three compressor, variable cycle gas turbine. At subsonic flight speeds it operates as a medium bypass turbofan. It becomes a low bypass turbofan when flying faster and is capable of supersonic cruise in the dry mode. A preliminary design of an ASTOVL aircraft from Cranfield, the S‐95, was used as the vehicle. Outlines the performance of the engine and its integration with the aircraft. Explains off‐design engine performance characteristics and describes variable geometry requirements. The major advantage of this engine is that all the components are employed all the time, for all operating modes, thus incurring low weight penalties. Predicts that the aircraft/ engine combination will perform in a satisfactory way, meeting most performance targets provided that some improvements are carried out.

Keywords

Citation

Wood, A. and Pilidis, P. (1997), "A variable cycle jet engine for ASTOVL aircraft", Aircraft Engineering and Aerospace Technology, Vol. 69 No. 6, pp. 534-539. https://doi.org/10.1108/00022669710186002

Publisher

:

MCB UP Ltd

Copyright © 1997, MCB UP Limited

Related articles