Case studies

After completion of the case study, the students will be able to understand lead and lag indicators, understand job performance and its linkage with job satisfaction, calculate the cost of turnover and design solutions to the problem of attrition and low satisfaction.

Pace Control Gears was a small-scale enterprise based out of Sonipat, India. It was an entrepreneurial venture by Rajesh Kumar, who had set Pace in 2010 to manufacture low-voltage electrical apparatus. Recently, Pace had begun to experience issues with quality control that were largely the result of human error. The company was facing a drop in satisfaction levels and higher attrition levels among the employees. Kumar had to find a solution quickly to address the problem, as it had direct implications for the company’s margins and the assurance of quality that it was associated with in the market.

This case study is suited to undergraduate and postgraduate courses in human resource management and general management.

Teaching notes are available for educators only.

CSS 6: Human Resources Management.

The learning outcomes are as follows: to evaluate the suitability of Surplus business model from accounting, finance, strategy and cultural perspectives; to identify the factors that contribute to the reluctance of business partners to join Surplus ecosystem and to suggest solutions; to identify the factors that contribute to the reluctance of consumers to join Surplus ecosystem and to suggest solutions; and to address unique funding and financial challenges faced by Surplus.

This case study discussed the challenges faced by Surplus Indonesia, a company founded upon the belief that a harmonious balance can be achieved between profitability and environmental stewardship. Stemming from the founder’s encounter with leftover food going to waste after buffets, Surplus embarked on a pioneering initiative using an application technology to address food wastage at the consumer level. Collaborating with various stakeholders such as retail outlets, restaurants, bakeries, cafes and hotels, the goal was to combat food waste while supporting Sustainable Development Goals 2, 12 and 13: Zero Hunger, Responsible Consumption & Production and Climate Action, respectively. Each meal saved through the Surplus app not only translated to reduced expenses for businesses but also contributed to reducing greenhouse gas emissions from landfills. Surplus’ overarching mission was to cut food waste and loss in Indonesia by half by 2030, fostering an environment where food waste is virtually nonexistent in the nation.

Undergraduate as well as graduate courses that focus on sustainability, accounting, financing and strategy

Teaching notes are available for educators only.

CSS 1: Accounting and Finance.

The learning outcomes are as follows: determine the conditions founders encounter when their company is not on the right track; examine the importance of ethics in entrepreneurship; draw up a broad framework to understand the degree of trouble an organization is in and how far it has gone since the early warning signs of trouble; and formulate a comprehensive solution for entrepreneurial founders to extricate their ventures from a crisis.

India-based Edtech company Byju’s was facing a slew of challenges as of mid-2023. Its founder and CEO Byju Raveendran needed to steer the company out of trouble.

Post Graduate/Executive Education.

Teaching notes are available for educators only.

CSS3: Entrepreneurship.

After completion of the case study, the students will be able to assess Paytm’s share buyback in the context of conventional practices, especially for loss-making firms, analyze the influence of initial public offering (IPO) performance on market sentiments and the role of subsequent events in shaping investor confidence, explore the regulatory framework for share buybacks in India and its impact on Paytm’s decision, scrutinize Paytm’s post-IPO financials and evaluate the board’s rationale for the share buyback and examine the factors influencing Paytm shareholders’ decisions amid the buyback, considering market conditions and the company’s outlook.

This case study discusses the unorthodox choice made by Paytm, a leading Indian digital payments and financial services provider, to begin a share repurchase program just one year after its substantial IPO. Paytm encountered difficulties as its stock price experienced a sharp decline of 74% following the IPO, which raised concerns among shareholders and elicited mistrust from analysts. This case study explores the reasoning for the buyback, the legislative framework of share buybacks in India and the diverse viewpoints of analysts regarding the company’s financial strategy. This case study provides not only ample opportunity to discuss ethical issues around managers’ corporate actions but also brings investors a dilemma.

This case study is suited to Master of Business Administration/Master of Science/Bachelor of Business Administration/Bachelor of Science.

Teaching notes are available for educators only.

CSS 1: Accounting and Finance.

This case study aims to equip students with the skills to evaluate the rationale behind a demerger decision, derive the enterprise value and equity value of the conglomerate using the discounted cash flow valuation modelling and assess the company’s value based on qualitative parameters using economy industry company analysis and strengths, weaknesses, opportunities and threats analysis.

This case study delves into the demerger of the financial services arm of Reliance Industries Limited into a separate unit named Jio Financial Services Limited. The independence of this unit is anticipated to enhance shareholder value and unlock the conglomerate discount. In light of these factors, a fundamental analysis of the firm is conducted to determine whether it presents a viable investment opportunity.

This case study is suitable for -graduate and postgraduate courses in financial management.

Teaching notes are available for educators only.

CSS 1: Accounting and finance.

After completion of the case study, students will be able to discuss the characteristics of sustainable enterprises driving the innovation; analyze the concept of waste to wealth, along with its associated benefits and challenges; provide an example of a sustainable start-up that operates conventionally and is attempting to increase production capacity through automation; and describe the strategies for scaling up the business.

Mr Manigandan Kumarappan’s goal was to provide the world with alternatives to plastic and other nonbiodegradable articles used in homes, offices, hotels and other places which compelled him to leave his corporate life behind and become an entrepreneur. His knowledge, expertise and creativity made him work toward providing a sustainable solution to the plastic-free world which made him create leafy straws for the world. His start-up Evalogia made 10,000 straws a day, mostly with manual production and machine-assisted in part of the processes. Evalogia got orders from all over the world after the ban on plastic from many countries. However, Evalogia was unable to meet the demand, as the manufacturing process mostly depended on manual production at present. Hence, the company planned to scale up its production capacity from 10,000 straws per day to 100,000 straws to meet the demand through automation or by increasing the production units to meet the growing demand from domestic and international markets. Kumarappan wondered if increasing the number of manufacturing facilities would make it harder to hire new staff, manage existing ones, train them and provide overall supervision; if these tasks were not completed well, the product’s quality and, subsequently, its demand, might suffer. The automation process required huge investment, time and a great deal of skepticism for its success. Kumarappan was stuck over whether to add more production units or automate the process to increase production.

This case study is suitable for graduate students.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

After completion of the case study, the students will be able to discuss how social entrepreneurs identify problems and convert them into opportunities, analyze the challenges faced by social entrepreneurs in setting up and growing a new venture and formulate an expansion strategy for a startup.

Over 2.6 billion people worldwide needed access to sanitation services, and most of them stayed in rural areas. Lack of access to sanitation had several negative consequences. In the Middle East North Africa (MENA) region, sanitation was one of the major challenges, with 66 million people still lacking basic sanitation facilities. Additionally, a very small proportion of the wastewater was properly treated. This lack of access to sanitation was a major barrier to economic development and poverty reduction. Out of the 17 most water-stressed countries in the world, 11 were in the MENA region. About 15 million people in rural Morocco did not have a proper and sustainable sanitation system. However, there was an enormous opportunity to use wastewater as a resource. The global market for wastewater treatment services was valued at US$53bn in 2021, and it was expected to grow to more than US$71bn by 2026. Two Moroccan scientists – Dr Salma Bougarrani and Dr Lahbib Latrach, who were born and brought up in Morocco and had seen the wastewater problem very closely, decided to help the people at the bottom of pyramid (BoP) after completing their PhD in environment and water treatment technologies and multisoil-layering technology. They founded GREEN WATECH, a social enterprise, in 2018, which provided a low-cost, efficient and practical solution for wastewater management in the rural areas of Morocco. GREEN WATECH won many awards and cash prizes for its product and business plan. The company had already reached five regions of Morocco and positively impacted the lives of thousands of Moroccans. The founders were planning to expand to areas in the rest of Morocco and other African and Middle East countries. GREEN WATECH had the potential to significantly impact the lives of people in rural areas and help improve wastewater management systems in developing countries through its patented technology. However, the founders faced several challenges in making their dream a reality. They needed a bigger team to expand to different locations and countries but were finding it difficult to get the right people. They also needed funds to expand their geographical reach but found it tough to get investors as they were still unable to break even. It remained to be seen how the founders of GREEN WATECH would achieve their expansion goals and help people at the BoP in other developing countries.

This case study is suited to the Master of Business Administration/Master of Science and executive program.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

This case study is tailored for audiences engaged in subjects such as entrepreneurship, strategy and foundational marketing principles. The academic focus aligns with the business model conceptualized by Osterwalder and Pigneur. This case study targets both undergraduate and graduate students at the university level, catering to interdisciplinary groups enrolled in courses related to entrepreneurship, strategy, marketing fundamentals and more. The objective is to equip students with the skills to construct diverse business models based on various potential alternatives. This case’s adaptable design and straightforward cost and revenue formulation facilitate comprehension for nonbusiness students, enabling them to grasp the multifaceted dimensions of a business model and project figures using basic arithmetic.

Fookifun emerged as a company born from Mrs Alejandra Padilla’s insightful grasp of the market. With the initial investment from her husband, she initiated a venture focused on delivering high-quality theatrical performances for children in the city of Barranquilla, situated in the northern region of Colombia. This narrative unfolds through early scenarios, illustrating the strategic decisions made by the entrepreneurs and the meticulous calculation of their costs and expenses. Alejandra steered her enterprise from 2014 to 2017, navigating through various alternatives and their associated costs. The narrative delved into 2017, depicting Alejandra’s pivotal decision-making process. Faced with the challenge of insufficient profitability, she contemplated the sustainability of the business. This period prompted her to reassess whether to persist with modifications or relinquish the venture altogether. The crux of Alejandra’s dilemma laid in the business’s meager profitability, which failed to generate adequate income for sustainability. It became imperative for her to make informed decisions, identifying modifiable variables within the business model and assessing their potential impact, particularly on the income generation model. This case study is tailored for audiences engaged in subjects such as entrepreneurship, strategy and foundational marketing principles. The academic focus aligns with the business model conceptualized by Osterwalder and Pigneur.

Given the characteristics of this case, it can be used for the teaching and learning of business or business administration, marketing, economics or related students, at higher or postgraduate levels (graduate school).

Teaching notes are available for educators only.

CSS3: Entrepreneurship.

After completion of the case study, students will be able to identify the traits required in child leadership and the ability to apply “The Whole Leadership Framework” child leadership model today, identify and discover opportunities to promote child leadership and analyse its sustainable impact and analyse how innovation clubbed with sustainability will create a competitive advantage with special reference to the innovative ultraviolet-C light sterilisation Suraksha Box.

Aditya Pachpande was a child prodigy of India, who had stunned the world with his trailblazing attitude ever since the tender age of 12. Aditya’s father, Sandeep Pachpande, a Harvard alumnus, wondered – “My son is ahead of his time. Would institutions ever acknowledge my innovative boy as a child leader? Will my child become a teen chief executive officer (CEO)? Will he ever get accepted?” Aditya leads by example as a student, changemaker, edupreneur, innovator and keynote speaker. He thinks, “Age is just a number”, but has had to shout out loud to be heard. With the nickname “Lecture man” given by his teachers and peers, he went on to contribute in endorsing skill-based experiential and discovery-based teaching-learning that addresses real-world issues and sustainable development goals. A CEO at the age of 11 years, he co-founded NextGenInnov8 Global Solutions Private Limited and NextGenInnov8 Social Foundation. Although achieving these milestones, he had to manoeuvre through several curve balls hurled at him by the system. Not the one to ever compromise on ethics, values and purpose, today he was at the crossroads – whether he should choose social change over-commercialisation of his business, simplicity and minimalism over product perfection, crowdfunding over loans or angel investors, manufacture in China or make in India just to name a few. The unstoppable Aditya, aspiring for acceptance, dreamt that someday, these policymakers and businesses would acknowledge child innovators and not write them off just because they were adolescents. Aditya, standing on a precipice, dreamt along.

This case has been particularly focused on postgraduate-early stage-level students pursuing business or entrepreneurial education-related programs.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

After completion of the case study, the students will be able to make strategic decisions for social entrepreneurship and carry out a sustainability and social impact analysis, assess the benefits of a circular economy-based retail model and investigate ways to preserve these benefits and recognize the ethical and sustainable issues facing the fast fashion sector and how social enterprises are addressing them.

The culture of fast fashion had proven to be dangerous for the environment as it had promoted a culture of consumerism and materialism. It had also increased the landfills in different countries. The need of the hour was to upcycle used and unwanted clothes into new innovative items. This idea had been practically implemented by Mrs Sujata Chatterjee of the Twirl Store, the protagonist of this case study. Chatterjee was a social entrepreneur who recognized the environmental and social problems caused by rapid fashion and abandoned apparel in landfills. She launched the Twirl Store, a social enterprise with the mission of advancing circular economy and sustainability practices in the textile sector. Rural women were economically and culturally empowered by the enterprise’s upcycling of used clothing using their abilities, and a sustainable source of income was created. Finding abandoned clothing, sorting and processing it effectively and locating clients who share her commitment to sustainability were difficult tasks for Chatterjee. Despite the difficulties, the Twirl Store served as an example of how circular economy concepts, cultural sustainability and women’s empowerment might be combined, highlighting the importance of social entrepreneurship in addressing global concerns and fostering positive social effects and economic impact.

This case study is applicable for undergraduate as well as post graduate students of management studies.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.