Case studies

1. Analyze the concept of disruptive change and its impact on organizational learning and development; 2. Develop the ability to identify and implement effective behavioral training interventions; 3. Understand the learning and development process; 4. Evaluate the challenges associated with online learning and explore strategies to overcome them; and 5. Recognize the significance of online learning in the current era and acquire knowledge and skills using online tools and applications for different job roles.

This case focuses on the new challenges that Shazia Zaheer, who is Head of the Learning and Development Department, is experiencing as a consequences of COVID-19 in her department. As her learning and development department has been focused primarily on traditional learning modes since the inception of Pakistan Telecommunication Limited (PTCL), she is facing additional challenges in adopting online learning because PTCL has undergone significant structural change. Since 1947, PTCL has been a state-owned enterprise. In 2005, the Pakistan Government privatized PTCL. This privatization resulted in numerous structural changes in management, hierarchy, chain of command, pay structure, product lines, technology and other factors. Employees were reduced from 90,000 to 23,000 as part of a volunteer separation plan, and a new scheme was introduced to streamline the process and improve efficiency. However, the employees at PTCL reacted to this transformation with union strikes and behavioral changes. Hence, this became a daunting challenge for Shazia Zaheer to change employees’ mindsets and instill corporate culture values. Nonetheless, she successfully won the half battle by changing the mindset of employees, and then she faced another challenge, COVID-19. This new normal brought new challenges for Shazia to implement online learning as her department relies solely on traditional modes of learning (classroom-based learning).

This case will be a good teaching aid if included in any courses on “Training and Development,” “Human Resource Management,” “Change Management” and “Online Learning” It would be better at the undergraduate (specialization courses) or graduate level.

Teaching notes are available for educators only.

CSS 6: Human Resource Management.

The case delves into the significant factors contributing to the steep decline of Sintex shares, examining both external and internal factors. Internally, the primary drivers were the expansion plan, the demerger decision, financial mismanagement and the delayed and inadequate integration of Information Technology (IT) into the business.

Sintex, a prominent private sector company listed in the Indian stock markets, operated in the textile and plastics sectors. However, in 2017, Sintex underwent a demerger into two separate entities: Sintex Industries Limited (SIL) and Sintex Plastics Technology Limited (SPTL). While SIL focused on textiles, SPTL dealt with plastics. However, soon after the demerger, the share prices of both companies began plummeting, leading to significant losses for investors. This case investigates the reasons behind this decline through a step-by-step analysis.

This case is suitable for postgraduate students pursuing an MBA, MMS and executive programs such as PGDBM and PGDM, with a specialization in business strategy. It is also beneficial for participants in management development programs (MDPs) designed for higher level executives. Additionally, the case can serve as training material for executives undergoing strategic role training within an organization. It is recommended to teach the case toward the end of the course, where the instructor can provide a summary of the previous classes’ teachings.

CCS7: Management Science

After reading and analysing the case study, the students would be able to distinguish the leadership styles based on leaders’ traits and behaviours, argue the importance of trust in leader–follower relationships thanks to the real-life examples presented and defend their side on the debate of whether leadership is born or made with the related theories and examples.

The teams coached by the successful Turkish basketball coach, Çetin Yılmaz, had reached the finals of the Turkish Basketball League six times and became champions three times. He assumed the coaching position of the Tuborg basketball team in December 2005. Although Tuborg’s Turkey branch made a serious financial investment in basketball, they were at the bottom of the league in the middle of the season. When Yılmaz took over the coaching position, the Tuborg basketball team’s main objective was not to be relegated from the top league in the 2005–2006 season. The team, working very hard, overcame the fear of relegation in two months but still had a very symbolic goal in front of it: winning the most prestigious game of the season by defeating the Karşıyaka team. However, in the last minutes of the game, with the influence of passionate Karşıkaya fans, the Tuborg team got scared and lost the game. At the end of the match, the club president entered the locker room and started shouting at the players, forcing the coach to face a severe dilemma. Either he would remain silent and risk damaging his leading position in the eyes of the players, or he would risk being fired by going against the president, even though he thought the president was right in what he said.

The target audience of this case study is undergraduate students. The field of study is sports management, leadership and coaching. This case study can be used in management, organizational behaviour and sports management courses while covering leadership and coaching topics.

Teaching notes are available for educators only.

CSS 6: Human resource management.

This case study attempts to sensitize the impact of restructuring on the organization’s employer brand. The students shall learn to appreciate the criticality of maintaining a balance between being an employee-centric organization and building a sustainable business model, to analyze the alternative people management strategies in emerging start-ups.

This case study illustrates the innovative human resource (HR) policies adopted by the start-up Meesho. Meesho was started as “Fashnear” by two Indian Institute of Technology graduates Sanjeev Barnwal and Vidit Aatrey in the year 2015, with the headquarters located in Bengaluru, Karnataka, India. It was a social commerce platform wherein the local apparel sellers or manufacturers could register themselves on the app and sell their products online to nearby consumers and the product would be delivered to their homes. Later, it was renamed Meesho (Meri E-Shop) with an improved business model. The innovative people-centric policies got Meesho recognition as one of the most employee-friendly start-ups and an innovative employer. However, later as part of the restructuring exercise, it had to lay off employees, which had a counter impact on its reputation and image as a desirable employer. This case study captures the dilemma faced by start-ups like Meesho who were in the process of sustaining their growth and optimizing their workforce and, at the same time, have to manage their employer brand in the process.

This case study can be used at the postgraduate level of management and in executive management programs.

Teaching notes are available for educators only.

CSS6: Human resource management.

The case study will encourage reflection on the challenges that organisations face in attracting, engaging and retaining knowledge workers that are critical to their performance and growth. It is set in the context of innovative, high-tech organisations whose success is heavily dependent on the performance of information technology (IT) professionals, a specialised and heavily demanded workforce.

The case study depicts the struggle of Manoel Almeida, Descomplica’s chief technology officer, to reverse the scenario of demotivation and high turnover among IT employees and to attract new talent. The case study addresses the themes of knowledge worker attraction, engagement and retention, with a focus on IT professionals.

This case study is designed for undergraduate and graduate education programmes/courses.

Teaching notes are available for educators only.

CSS 7: Management science.

Upon completion of the case study, the students will be able to find the challenges and underlying structures that cause the problem; the students will be able to identify the dynamic variables and develop the interconnection and interlinkages among the time-delayed variables to build the story of the business case; the students could develop the block diagram and could build the system dynamics model using the simulation software STELLA, and if they do not have the simulation software, even then they could have a mental model to understand the problem well; the system dynamics students can design the policies to make the system better behaved and recommend solutions; and the students could make mind maps and develop the mental model and could recommend solutions and way forward to overcome the challenges and solve the issues.

Tradeasia is a small-scale manufacturing firm that had started its business activities near Sundar Industrial Estate, Raiwind, in September 2007. The company’s prime focus was to buy the potato starch from chips manufacturing companies and, then, extract the potato starch from the waste potato using its own machinery and sell it as a sizing agent to textile mills. Quality characteristics in terms of better millage and enhanced gullibility made it compatible with Rafhan corn-based starch. The major challenge linked to potato starch was its degree of wetness; the potato starch either extracted from rotten potato or procured from the potato chips manufacturing companies had a high degree of wetness and moisture content. Wet potato starch sometimes had more than 60% moisture content, which was really a challenge. Owing to the high degree of wetness, the wet starch was prone to fungus growth, and within hours, the fungus created toxins if it was not dried immediately, and then after 24 h, toxins acquired a black colour, and they became hardened like pebbles. The starch then was unusable even for sizing purposes for textile products. Reduction in the degree of wetness was really a big challenge and demanded prompt action and high productivity of the operational staff to make that product dry for sale purposes. This was the biggest challenge that ended up in huge inventories of wet starch. Capacity constraints and operational inefficiency killed the company’s productivity and affected the company’s profit.

This case study is written and developed for MBA and MS-level supply chain students of the system dynamics course or those studying management of supply chain complexities. This case study discusses the operational challenges while running the business; huge inventories, capacity constraints and inefficiency in production operations were the challenges associated with almost all manufacturing industries. This case study discussed not only why such challenges are appearing in the business but also the solution that resided in the wisdom shared by the employees in the board meeting. An integrated system dynamics model could be used to design the policies to overcome such challenges. Even the block diagram of the model and causal loop diagram could help to conceptualize the problem and explore the way forward.

Teaching notes are available for educators only.

CSS 7: Management science.

• After working through the case and assignment questions, students will be able to do the following:• Identify the difference between core competencies and dynamic capabilities and how they make a difference in a crisis towards building an agile organisation.• Evaluate the support through a collaborative, temporary, trans-organisational system to local manufacturers to achieve agility and sustainability.• Realise the importance of clear expectations exchange and communication between partners to enhance collaboration, even in temporary structures in increasing agility and sustainability.

The COVID-19 pandemic and subsequent lockdowns created a crisis for South Africa and the President, Cyril Ramaphosa called for urgent collaboration between business, labour and government to meet the demand for locally produced Personal Protective Equipment (PPE) and medical devices. The case illustrates this response and collaboration between government, labour and business through a temporary newly formed structure, called Business for South Africa (B4SA). Ross Boyd, Head of the innovation work stream of B4SA which housed the local manufacturing partnership (LMP) was considering his dilemma of how to be agile in sustaining their support to the South African manufacturers even though the LMP was a temporary structure. The local manufacturers had to repurpose their production lines to produce local PPE and medical devices. How could the LMP support the South African manufacturers to sustain their agility in building capabilities during COVID-19? At the same time, Ahmed Dhai, the Group Executive of Operations of Kingsgate Clothing, which was benefiting from the support of the LMP, was reflecting on his leadership in taking decisions to repurpose production and increase capacity during COVID-19. Dhai was considering his dilemma of being agile during and beyond the COVID-19 pandemic. The case features several decisions taken by Kingsgate and offers students the opportunity to evaluate these decisions given the fluctuations in supply and demand of PPE and the leadership that Dhai demonstrated in how he communicated and dealt with his staff during the pandemic. Students could also give recommendations to Ross Boyd and Ahmed Dhai on how they could lead their organisations to be more agile during and beyond COVID-19.

The case study is suitable for MBA or MPhil level on Strategy courses. The case would also find good application in Organisational Behaviour and Leadership courses on Masters level and Executive Education programmes.

Teaching notes are available for educators only.

CSS 7: Management Science.

After reading and analyzing the case study, the students would be able to understand the complexities of leadership and decision-making in a diverse workplace, specifically when promoting differently abled employees; explore the importance of fostering an inclusive environment, addressing biases and developing empathy in the context of leadership and diversity; explore the challenges and considerations involved in managing a team with diverse backgrounds and abilities; and evaluate the potential impact of promoting employees with disabilities on the morale and retention of other team members.

This case study is about a hearing-impaired individual, Jessica, who was recently hired by a medium-sized organization, Zerial Education. She was the organization’s first hire with a disability, and some of her colleagues were skeptical about how she would fit in. There was a clear bias against her because of her disability, and she faced many challenges while proving herself and earning the respect of her colleagues. Despite the initial skepticism and bias, she quickly proved herself to be a valuable member of the team. As the appraisal period arrived, Stan Logan, her reporting manager, faced a tough decision. He wanted to be fair and avoid to seem to be biased, yet he was also committed to fostering diversity and inclusion. If he promoted Jessica, it would affirm the company’s commitment to diversity and inclusivity, and it would also validate Jessica’s impressive year of work. However, this might come at the cost of creating tensions among the other top performers who were also deserving of the promotion and potentially complicating client interactions owing to Jessica’s hearing impairment. Logan had to navigate these complexities and make a decision that aligned with both the company’s values and operational needs, while also considering the potential consequences on team morale and client relationships.

The case is suitable for use by students at an MBA level. Human resource management: In this course, students might learn about the legal and ethical issues surrounding disability in the workplace, as well as strategies for recruiting and retaining employees with disabilities. Organizational behavior: In this course, students might learn about the psychological and social factors that influence how individuals with disabilities are perceived and treated in organizations, as well as how to promote diversity and inclusion within a company.

Teaching notes are available for educators only.

CSS 6: Human resource management

After completion of the case study, the students will be able to understand the importance of being culturally savvy when working in a culturally diverse environment and managing people from different cultures; critically reflect on the risks resulting from the absence of a clear direction from the company’s top management regarding unifying corporate values and a diversity policy for cooperation across cultures; be aware of best practices in implementing diversity management (DM) initiatives in the company; and learn that changes in the strategic orientation (i.e. focus on automation projects) must be cascaded down to hard elements of structures, processes and systems, as well as to soft elements of skills, staff and management style.

The Kuwaiti branch of a Japanese corporation specialising in control systems and instruments, Rising Sun IT, hired a German professional, Alex, to handle the increasing demand for automation from customers. This recruitment followed several unsuccessful attempts by the company to deliver more advanced automation solutions. Recognising the need to adapt to Kuwaiti customer requirements or risk losing market share, Japanese management understood the importance of transforming their engineering staff. Failure to achieve this next automation step would result in a steady decline in market share and ultimately impact the company’s survival. However, Alex, who was supposed to lead automation projects, was confronted with opposition from the Indian engineering staff and managers. He was not able to find common ground with the staff and perceived issues such as lack of communication, delays in work schedules, missed deadlines and high levels of absenteeism, as a sign of low work morale. Although he tried to increase the awareness of his supervisor and other managers by informing them repeatedly about the problems regarding employee behaviours, his interventions went unheard. He felt ousted by his fellow colleagues and the other employees. Besides, from Alex’s point of view, the Japanese top management did not provide clear directions to the staff and explicit support to Alex in his efforts. This case study highlights three dimensions of Alex’s problem with establishing and maintaining working relationships with other people in the company:▪ Alex’s cultural “blindness” and ignorance of differences in work behaviours that ultimately led to his inability to build solid and trustful relationships with other employees. The case study demonstrates Germany’s performance-oriented and individual-centric culture versus India’s family- and community-oriented culture and the Japanese employees’ strongly hierarchical and company loyalty-oriented culture.▪ Lack of support from the Japanese top management to Alex, which is connected with a wider problem of the lack of a systematic strategic approach to managing a culturally diverse workforce. The case study pinpoints the rhetoric–reality gap in DM in the company, where the diversity, equity and inclusion programme and corporate values were applied only formally and had little attention from the leaders as well as non-managerial employees.▪ Employee resistance to change: The lack of positive communication from the top management level in the company regarding automation projects and the lack of support for Alex’s mission in the company resulted in steady resistance to executing projects, which endangered the company’s survival in the market. Also, one part of Alex’s problem with building a working relationship with the Indian engineering staff was based on the fact that others perceived him as the automation “change agent” – an advocate and catalyst of an undesirable change connected with adverse consequences on employment in the Indian community.

This case is intended for discussion in undergraduate management and business study programmes.

Teaching notes are available for educators only.

CSS 6: Human resource management.

The learning outcomes of this study are as follows:

1) illustrate the project management failures that contributed to the fire accident at Grenfell using a fishbone diagram;

2) identify and classify the power and influence of various stakeholders involved in a brownfield project using a relevant framework; and

3) elaborate the need for following effective stakeholder management processes and project leadership, especially in the context of a refurbishment/renovation project.

On 14th June 2017, the Grenfell Tower in North Kensington, West London, UK, caught fire. The fire raged for 60 h and around 72 people lost their lives. Many criticized the response of the London Fire Brigade (LFB) and their lack of preparedness to respond to such an emergency. There were calls for Dany Cotton, the Chief of LFB, to resign. However, there had been a major cladding-related refurbishment at Grenfell, and subsequent investigations revealed that the use of combustible materials, a lack of compliance with the fire-safety norms and a blatant disregard for resident safety had contributed to the fire. The tragedy was a cumulative outcome of failure on two counts: effective project management and stakeholder management during the process of refurbishment, especially in the context of a low-cost housing project. Given this situation, this case considers whether Dany Cotton should own up to her responsibility and resign from her position. In the process, the case considers Grenfell refurbishment from the theoretical lens of project management in the construction management scenario to understand the factors that could have led to an “avoidable” tragedy.

Postgraduate students of construction management; final year undergraduate engineering students who have a foundational course on project management; and architects.

Teaching notes are available for educators only.

CSS 2: Built environment.