Case studies

The learning outcomes are as follows: to identify and analyze the importance of operations management in a situation demanding minimizing environmental impact and maintaining operational momentum; access the risks faced during project executions and apply project management concepts to facilitate Karachi Steel in implementing indigenous technological solutions; and evaluate the importance of adaptability, continuous improvement and innovation in creating sustainable solutions to address complex challenges.

Javaid Iqbal, CEO of Karachi Steel, was the case’s protagonist. With capacity expansion, Javaid relocated the steel facility from Rawalpindi to Islamabad, Pakistan. The company encountered several difficulties because of the air emissions’ inconvenience to nearby residents and the strict environmental regulations. To push the emissions into the air, the company first installed a locally fabricated chimney. Later, they hired a foreign Pakistani engineering firm to install air filters, but the project proved unsuccessful. To control emissions, the company developed a Wet Particulate Control (WPC) system based on a water-sprinkling mechanism. The endeavor was successful, but it resulted in water pollution. As a result, Karachi Steel signed a contract with a local engineering company that invented and effectively installed an air filtration system. Karachi Steel not only devised solutions for their predicaments but also made significant contributions toward achieving the Sustainable Development Goals (SDGs). However, the emissions reporting and monitoring mechanism continued to cause inconvenience for regulators. In addition, the filtration facility encountered a blocked duct conveying zinc sulfate from smoke, resulting in the periodic suspension of operations. As Karachi Steel seek long-term solutions to current challenges, it is critical to examine the relationship between internal circumstances and external forces and stimulate a holistic approach to resolving issues within the realms of operations management and project management.

The case study is suitable for students pursuing their undergraduate degree programs in business studies or management sciences. This case can be taught in specific subjects in the domain of management sciences, including project management and operations management. Furthermore, undergraduate students pursuing degrees in environmental sciences, specializing in environmental impact assessment and sustainable development, can also learn from this case study. These subjects have the potential to provide students with a detailed understanding of the dynamic relationship between environmental problems caused by business activities, and how to address these challenges using principles of project management and operations management. There is no pre-requisite for this case study, and the level of difficulty is moderate. The recommended teaching pedagogy for this multidisciplinary case study includes role-playing exercises, simulations to replicate real-world situations and the Socratic method, which encourages critical thinking.

Teaching notes are available for educators only.

CSS 7: Management Science.

After completion of the case study, the students will be able to make strategic decisions for social entrepreneurship and carry out a sustainability and social impact analysis, assess the benefits of a circular economy-based retail model and investigate ways to preserve these benefits and recognize the ethical and sustainable issues facing the fast fashion sector and how social enterprises are addressing them.

The culture of fast fashion had proven to be dangerous for the environment as it had promoted a culture of consumerism and materialism. It had also increased the landfills in different countries. The need of the hour was to upcycle used and unwanted clothes into new innovative items. This idea had been practically implemented by Mrs Sujata Chatterjee of the Twirl Store, the protagonist of this case study. Chatterjee was a social entrepreneur who recognized the environmental and social problems caused by rapid fashion and abandoned apparel in landfills. She launched the Twirl Store, a social enterprise with the mission of advancing circular economy and sustainability practices in the textile sector. Rural women were economically and culturally empowered by the enterprise’s upcycling of used clothing using their abilities, and a sustainable source of income was created. Finding abandoned clothing, sorting and processing it effectively and locating clients who share her commitment to sustainability were difficult tasks for Chatterjee. Despite the difficulties, the Twirl Store served as an example of how circular economy concepts, cultural sustainability and women’s empowerment might be combined, highlighting the importance of social entrepreneurship in addressing global concerns and fostering positive social effects and economic impact.

This case study is applicable for undergraduate as well as post graduate students of management studies.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

This case is written to help students understand the concept of segmentation, targeting and positioning in the context of the biscuit industry. The primary learning objectives can be identified as follows: understand the different categorisation in the biscuit market; analyse the basis of consumer segmentation in the biscuit market; analyse the marketing mix strategy of a firm; and highlight the importance of positioning.

Rao, the Director (Marketing) of Mayora India Private Limited, was in dilemma as to how to position Coffee Joy biscuits in the Indian market. The Indian market was intensely competitive with major players like Britannia, Parle and ITC capturing a major share of the market. Should he consider the only the south Indian market based on geography?” Or “Should he target the modern aspirational youth of the country who frequent “Starbucks”?

This case is appropriate for the use in postgraduate course on Marketing particularly on “Segmenting-Targeting-Positioning” (STP) module. The science of STP lies in the collection and analysis of market knowledge and research to understand consumer’s mind, whereas its art lies in generating various implementable alternatives so that the brand can find a place in the hearts and minds of consumers.

Teaching notes are available for educators only.

CSS8: Marketing.

After completion of the case study, students will be able to discuss the characteristics of sustainable enterprises driving the innovation; analyze the concept of waste to wealth, along with its associated benefits and challenges; provide an example of a sustainable start-up that operates conventionally and is attempting to increase production capacity through automation; and describe the strategies for scaling up the business.

Mr Manigandan Kumarappan’s goal was to provide the world with alternatives to plastic and other nonbiodegradable articles used in homes, offices, hotels and other places which compelled him to leave his corporate life behind and become an entrepreneur. His knowledge, expertise and creativity made him work toward providing a sustainable solution to the plastic-free world which made him create leafy straws for the world. His start-up Evalogia made 10,000 straws a day, mostly with manual production and machine-assisted in part of the processes. Evalogia got orders from all over the world after the ban on plastic from many countries. However, Evalogia was unable to meet the demand, as the manufacturing process mostly depended on manual production at present. Hence, the company planned to scale up its production capacity from 10,000 straws per day to 100,000 straws to meet the demand through automation or by increasing the production units to meet the growing demand from domestic and international markets. Kumarappan wondered if increasing the number of manufacturing facilities would make it harder to hire new staff, manage existing ones, train them and provide overall supervision; if these tasks were not completed well, the product’s quality and, subsequently, its demand, might suffer. The automation process required huge investment, time and a great deal of skepticism for its success. Kumarappan was stuck over whether to add more production units or automate the process to increase production.

This case study is suitable for graduate students.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

After completion of the case study, the students will be able to discuss how social entrepreneurs identify problems and convert them into opportunities, analyze the challenges faced by social entrepreneurs in setting up and growing a new venture and formulate an expansion strategy for a startup.

Over 2.6 billion people worldwide needed access to sanitation services, and most of them stayed in rural areas. Lack of access to sanitation had several negative consequences. In the Middle East North Africa (MENA) region, sanitation was one of the major challenges, with 66 million people still lacking basic sanitation facilities. Additionally, a very small proportion of the wastewater was properly treated. This lack of access to sanitation was a major barrier to economic development and poverty reduction. Out of the 17 most water-stressed countries in the world, 11 were in the MENA region. About 15 million people in rural Morocco did not have a proper and sustainable sanitation system. However, there was an enormous opportunity to use wastewater as a resource. The global market for wastewater treatment services was valued at US$53bn in 2021, and it was expected to grow to more than US$71bn by 2026. Two Moroccan scientists – Dr Salma Bougarrani and Dr Lahbib Latrach, who were born and brought up in Morocco and had seen the wastewater problem very closely, decided to help the people at the bottom of pyramid (BoP) after completing their PhD in environment and water treatment technologies and multisoil-layering technology. They founded GREEN WATECH, a social enterprise, in 2018, which provided a low-cost, efficient and practical solution for wastewater management in the rural areas of Morocco. GREEN WATECH won many awards and cash prizes for its product and business plan. The company had already reached five regions of Morocco and positively impacted the lives of thousands of Moroccans. The founders were planning to expand to areas in the rest of Morocco and other African and Middle East countries. GREEN WATECH had the potential to significantly impact the lives of people in rural areas and help improve wastewater management systems in developing countries through its patented technology. However, the founders faced several challenges in making their dream a reality. They needed a bigger team to expand to different locations and countries but were finding it difficult to get the right people. They also needed funds to expand their geographical reach but found it tough to get investors as they were still unable to break even. It remained to be seen how the founders of GREEN WATECH would achieve their expansion goals and help people at the BoP in other developing countries.

This case study is suited to the Master of Business Administration/Master of Science and executive program.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

After completion of the case study, students will be able to understand the service offerings within the nascent electric vehicle (EV) sector and end-consumer needs of EV charging services, understand the reasoning behind Sunfuel Electrics (SFEs) prioritisation of destination charging for their first go-to-market (GTM) strategy and appreciate SFE’s use of community marketing and alliance partners to execute its various strategies. Connect game-theory with the proposed strategies.

SFE was an early start-up in EV charging space. The co-founders believed that any success would hinge on their ability to play a differentiated game and carve a distinct yet profitable niche in the EV charging arena. SFE deliberately focussed on “destination charging” and identified a segment that they were confident of making a difference: the discerning high-end consumer. Soon, SFE’s success caught the eye of its deep-pocketed competitors who also entered the same space. As a single service company, the co-founders set in motion a back-up plan and identified three new strategic thrust areas to maintain SFE’s competitive edge. The first involved entering the city charging segment, and the second was a pioneering concept branded “E-Trails” targeted at a community of EV owners who were motor enthusiasts. Thirdly, SFE conceptualised an EV-Roadhouse concept, promising a full-bouquet of select premium services at a pit-stops along the highway. The co-founders needed to test which and to what extent would these initiatives would translate into real gains and if returns were commensurate with investments and SFE’s ability to deliver a scalable consistent experience. Specifically, if these proposed asset-light avenues added the required heft to their GTM strategy.

This case study is suitable for post-graduate students in marketing, strategy, entrepreneurship and sustainability courses.

Teaching notes are available for educators only.

CSS 8: Marketing.

After completion of the case study, students will be able to identify the traits required in child leadership and the ability to apply “The Whole Leadership Framework” child leadership model today, identify and discover opportunities to promote child leadership and analyse its sustainable impact and analyse how innovation clubbed with sustainability will create a competitive advantage with special reference to the innovative ultraviolet-C light sterilisation Suraksha Box.

Aditya Pachpande was a child prodigy of India, who had stunned the world with his trailblazing attitude ever since the tender age of 12. Aditya’s father, Sandeep Pachpande, a Harvard alumnus, wondered – “My son is ahead of his time. Would institutions ever acknowledge my innovative boy as a child leader? Will my child become a teen chief executive officer (CEO)? Will he ever get accepted?” Aditya leads by example as a student, changemaker, edupreneur, innovator and keynote speaker. He thinks, “Age is just a number”, but has had to shout out loud to be heard. With the nickname “Lecture man” given by his teachers and peers, he went on to contribute in endorsing skill-based experiential and discovery-based teaching-learning that addresses real-world issues and sustainable development goals. A CEO at the age of 11 years, he co-founded NextGenInnov8 Global Solutions Private Limited and NextGenInnov8 Social Foundation. Although achieving these milestones, he had to manoeuvre through several curve balls hurled at him by the system. Not the one to ever compromise on ethics, values and purpose, today he was at the crossroads – whether he should choose social change over-commercialisation of his business, simplicity and minimalism over product perfection, crowdfunding over loans or angel investors, manufacture in China or make in India just to name a few. The unstoppable Aditya, aspiring for acceptance, dreamt that someday, these policymakers and businesses would acknowledge child innovators and not write them off just because they were adolescents. Aditya, standing on a precipice, dreamt along.

This case has been particularly focused on postgraduate-early stage-level students pursuing business or entrepreneurial education-related programs.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

The case study can be used for the course of entrepreneurship and is appropriate for postgraduate students. Discussion would be the most appropriate method for teaching this case study. Through Nutan’s words, students could gain a first-hand glimpse into the transformative journey of a rural woman entrepreneur.

In 2018, Nutan Jha embarked on a remarkable journey by establishing Nutan Creations, a micro-enterprise situated in Kharrak village, Jhanjharpur, Bihar (India). This case study aims to achieve multiple objectives: understanding the operational obstacles confronted by a rural woman entrepreneur, acknowledging the inseparable connection between business and social issues in rural contexts, moreover shedding light on the intersection of gender, entrepreneurship and cultural preservation through traditional Madhubani painting art form products. This distinctive combination brings a fresh perspective to the research, offering unique insights into the challenges and triumphs experienced by rural women entrepreneurs. The findings of this case study exemplify the intricate interplay between business and social concerns in rural areas, portraying an inspiring depiction of how determination, adaptability and robust support networks can conquer hurdles and foster transformative changes.

The case study has been designed for the students of business administration and entrepreneurship who have completed their elementary model on marketing comprehend. The students should need to understand the concept of entrepreneurship and the basics of digital marketing strategy to ensure effective learning.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

After reading and analyzing this case study, students will be able to describe the challenges of creating an electric vehicle (EV) start-up with the objective of zero-carbon emissions, identify opportunities and challenges for Satyadarshan Technologies & Services (STS) in enhancing the B2B customer base and sales volumes in the EV market, identify and assess government incentives to reinforce STS’s existing EV business and compose an understanding of and determine an ability to use various industrial marketing and promotion strategies for STS in the present environment.

STS was launched in 2020 to provide environmentally conscious urban commuting. Himanshu Purohit, the founder of STS, commenced an e-bicycle assembly unit and produced the first advanced electric drivetrain technology. The vision was to transform how people viewed mobility and make EVs the standard for a healthier globe. Nurturing a start-up with zero-carbon emissions was tedious due to limited infrastructure, high costs, low market acceptance and supply chain constraints. With the relentless pursuit of excellence, STS constantly pushed the boundaries and crossed the break-even ceiling in the year 2022. As a budding player in the souk, the company expected to gain a strong presence in the EV market with particular attention to the B2B customer segment. At the same time, the company aimed to ensure business sustainability by leveraging government incentives. The company needed to expand its corporate sales volume and craft a sustainable competitive advantage. Purohit recognized various challenges to the sustainability of STS that stood between the company's goals and their realization, particularly in achieving a sustainable move in the EV segment. Consequently, Purohit found himself at a critical juncture to pave the path toward the growth of the start-up. Eventually, analysis of the company's business challenges, industrial marketing and promotional strategies required strategic planning to appraise and evaluate the business model.

This case study is designed for new-age Master of Business Administration and executive management programs. It should be used in entrepreneurship and strategic management courses to discuss small innovative e-bike start-ups. This includes conducting a competitive analysis and self-assessing a firm's market-oriented strategies. Prima facie, undergraduate and postgraduate students are beneficiaries of this case. This case study may also be conducive to teaching how to initiate a sustainable and green vehicle business. This case study guides students entering the EV business, addressing industry-specific challenges and conducting market analysis.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

By the end of the lesson, students should be able to identify and think critically about common business problems and come up with possible solutions, explain how a business owner’s attributes can influence the business decisions they make, use available information to assess the viability and sustainability of a business model/strategy, determine the strengths and weaknesses of a particular marketing strategy and suggest ways to improve it and use the information provided to evaluate the risks and benefits of business growth strategies and determine their appropriateness for specified circumstances.

Mambokadzi is a small business with considerable potential in Zimbabwe’s beauty and personal care industry. The case study spans several years, highlighting Sharon Chingwaro’s journey as she navigates the difficulties of starting and growing a business with limited resources. The case study delves into various aspects of running a small business, such as production, marketing, distribution, human resources and intellectual property. It also discusses the value of resilience and endurance, as well as the need for resourcefulness when starting and growing a business under difficult circumstances. This case study is intended to teach entrepreneurship and marketing strategies to both under- and postgraduate students, with a particular emphasis on the difficulties of starting and growing a business in a limited-resource environment. It has applications in a variety of fields, including entrepreneurship, strategic management and marketing.

This case study is suitable for undergraduate and postgraduate students.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.