Case studies

After completion of the case study, the students will be able to understand lead and lag indicators, understand job performance and its linkage with job satisfaction, calculate the cost of turnover and design solutions to the problem of attrition and low satisfaction.

Pace Control Gears was a small-scale enterprise based out of Sonipat, India. It was an entrepreneurial venture by Rajesh Kumar, who had set Pace in 2010 to manufacture low-voltage electrical apparatus. Recently, Pace had begun to experience issues with quality control that were largely the result of human error. The company was facing a drop in satisfaction levels and higher attrition levels among the employees. Kumar had to find a solution quickly to address the problem, as it had direct implications for the company’s margins and the assurance of quality that it was associated with in the market.

This case study is suited to undergraduate and postgraduate courses in human resource management and general management.

Teaching notes are available for educators only.

CSS 6: Human Resources Management.

The learning outcomes are as follows: to analyse the issue(s) presented within specific case study context (C4); to formulate solutions to identified issue(s) within specific case study context (C5); and to synthesise a group plan to solve issue(s) within specific case study context (A4).

In 2017, China proclaimed that it would no longer accept plastic waste for recycling, this was in-line with China’s Operation “National Sword” to review the quality of these plastic imports to ensure their recyclability. This sent shock waves through a now globalised recycling network, with China previously having imported 95% of the EUs and 70% of US plastics that had been collected for recycling. This plastic backlog was then diverted to South-East Asian nations, particularly Malaysia, which this case focuses the discussion upon. While the potential for significant economic benefits drew the attention of illegitimate and unscrupulous businessmen alike, the environmental degradation from the often, low technological recycling processes and even burning of low-grade plastics brought profound negative impacts. This case focuses upon, then Minister, Yeo Bee Yin who led the Ministry of Energy, Science, Technology, Environment and Climate Change, in which she took an active and aggressive stance in attempt to stop Malaysia becoming the dumping ground for the global plastic crisis.

This case is appropriate for final year undergraduate and any postgraduate degrees in Business.

Teaching notes are available for educators only.

CSS 4: Environmental Management.

The authors have discussed the importance of creating socially transformative health-care ecosystems in emerging economies like India. After completion of this case study and assignment questions, the students will be able to apply the case experience to comprehend the underlying factors influencing the decision of the implementation and replication of the Sanjeevani health-care service delivery model, understand the impact of free and subsidized health-care service delivery models on social transformation, evaluate the operational performance of health-care institutions using the balanced scorecard model and create practical relevance when implementing novel health-care solutions like Sanjeevani, which has been successful due to its singular pin-pointed focus on solving the issue of congenital heart diseases (CHDs).

Forty thousand surgeries against 0.3 million new CHD patients every year was the unbalanced equation of pediatric cardiac care in India. It also contributed to almost 46% of total CHD prevalence in the world. This case study explores the evolution of the affordable health-care ecosystem provided by Sri Sathya Sai Sanjeevani Hospital (Sanjeevani), Raipur, Chhattisgarh, which included services ranging from OPD to postoperative surgical care, including accommodation and food, completely free of cost. Over the past eight years, it had managed over 80,000 pediatric cardiac outpatients and performed over 9,000 surgeries. This case study also outlines the execution of Sanjeevani, as an affordable health venture aimed at producing social transformation. The pertinent question to be explored is, “Can the Sanjeevani healthcare ecosystem be replicated, both operationally and financially?”

This case study is suited to undergraduate Bachelor of Business Administration, Master of Business Administration (MBA) and executive MBA.

Teaching notes are available for educators only.

CSS 2: Built Environment.

This case study is tailored for audiences engaged in subjects such as entrepreneurship, strategy and foundational marketing principles. The academic focus aligns with the business model conceptualized by Osterwalder and Pigneur. This case study targets both undergraduate and graduate students at the university level, catering to interdisciplinary groups enrolled in courses related to entrepreneurship, strategy, marketing fundamentals and more. The objective is to equip students with the skills to construct diverse business models based on various potential alternatives. This case’s adaptable design and straightforward cost and revenue formulation facilitate comprehension for nonbusiness students, enabling them to grasp the multifaceted dimensions of a business model and project figures using basic arithmetic.

Fookifun emerged as a company born from Mrs Alejandra Padilla’s insightful grasp of the market. With the initial investment from her husband, she initiated a venture focused on delivering high-quality theatrical performances for children in the city of Barranquilla, situated in the northern region of Colombia. This narrative unfolds through early scenarios, illustrating the strategic decisions made by the entrepreneurs and the meticulous calculation of their costs and expenses. Alejandra steered her enterprise from 2014 to 2017, navigating through various alternatives and their associated costs. The narrative delved into 2017, depicting Alejandra’s pivotal decision-making process. Faced with the challenge of insufficient profitability, she contemplated the sustainability of the business. This period prompted her to reassess whether to persist with modifications or relinquish the venture altogether. The crux of Alejandra’s dilemma laid in the business’s meager profitability, which failed to generate adequate income for sustainability. It became imperative for her to make informed decisions, identifying modifiable variables within the business model and assessing their potential impact, particularly on the income generation model. This case study is tailored for audiences engaged in subjects such as entrepreneurship, strategy and foundational marketing principles. The academic focus aligns with the business model conceptualized by Osterwalder and Pigneur.

Given the characteristics of this case, it can be used for the teaching and learning of business or business administration, marketing, economics or related students, at higher or postgraduate levels (graduate school).

Teaching notes are available for educators only.

CSS3: Entrepreneurship.

The learning outcomes are as follows: determine the conditions founders encounter when their company is not on the right track; examine the importance of ethics in entrepreneurship; draw up a broad framework to understand the degree of trouble an organization is in and how far it has gone since the early warning signs of trouble; and formulate a comprehensive solution for entrepreneurial founders to extricate their ventures from a crisis.

India-based Edtech company Byju’s was facing a slew of challenges as of mid-2023. Its founder and CEO Byju Raveendran needed to steer the company out of trouble.

Post Graduate/Executive Education.

Teaching notes are available for educators only.

CSS3: Entrepreneurship.

After completion of the case study, students will be able to discuss the characteristics of sustainable enterprises driving the innovation; analyze the concept of waste to wealth, along with its associated benefits and challenges; provide an example of a sustainable start-up that operates conventionally and is attempting to increase production capacity through automation; and describe the strategies for scaling up the business.

Mr Manigandan Kumarappan’s goal was to provide the world with alternatives to plastic and other nonbiodegradable articles used in homes, offices, hotels and other places which compelled him to leave his corporate life behind and become an entrepreneur. His knowledge, expertise and creativity made him work toward providing a sustainable solution to the plastic-free world which made him create leafy straws for the world. His start-up Evalogia made 10,000 straws a day, mostly with manual production and machine-assisted in part of the processes. Evalogia got orders from all over the world after the ban on plastic from many countries. However, Evalogia was unable to meet the demand, as the manufacturing process mostly depended on manual production at present. Hence, the company planned to scale up its production capacity from 10,000 straws per day to 100,000 straws to meet the demand through automation or by increasing the production units to meet the growing demand from domestic and international markets. Kumarappan wondered if increasing the number of manufacturing facilities would make it harder to hire new staff, manage existing ones, train them and provide overall supervision; if these tasks were not completed well, the product’s quality and, subsequently, its demand, might suffer. The automation process required huge investment, time and a great deal of skepticism for its success. Kumarappan was stuck over whether to add more production units or automate the process to increase production.

This case study is suitable for graduate students.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

After completion of the case study, the students will be able to discuss how social entrepreneurs identify problems and convert them into opportunities, analyze the challenges faced by social entrepreneurs in setting up and growing a new venture and formulate an expansion strategy for a startup.

Over 2.6 billion people worldwide needed access to sanitation services, and most of them stayed in rural areas. Lack of access to sanitation had several negative consequences. In the Middle East North Africa (MENA) region, sanitation was one of the major challenges, with 66 million people still lacking basic sanitation facilities. Additionally, a very small proportion of the wastewater was properly treated. This lack of access to sanitation was a major barrier to economic development and poverty reduction. Out of the 17 most water-stressed countries in the world, 11 were in the MENA region. About 15 million people in rural Morocco did not have a proper and sustainable sanitation system. However, there was an enormous opportunity to use wastewater as a resource. The global market for wastewater treatment services was valued at US$53bn in 2021, and it was expected to grow to more than US$71bn by 2026. Two Moroccan scientists – Dr Salma Bougarrani and Dr Lahbib Latrach, who were born and brought up in Morocco and had seen the wastewater problem very closely, decided to help the people at the bottom of pyramid (BoP) after completing their PhD in environment and water treatment technologies and multisoil-layering technology. They founded GREEN WATECH, a social enterprise, in 2018, which provided a low-cost, efficient and practical solution for wastewater management in the rural areas of Morocco. GREEN WATECH won many awards and cash prizes for its product and business plan. The company had already reached five regions of Morocco and positively impacted the lives of thousands of Moroccans. The founders were planning to expand to areas in the rest of Morocco and other African and Middle East countries. GREEN WATECH had the potential to significantly impact the lives of people in rural areas and help improve wastewater management systems in developing countries through its patented technology. However, the founders faced several challenges in making their dream a reality. They needed a bigger team to expand to different locations and countries but were finding it difficult to get the right people. They also needed funds to expand their geographical reach but found it tough to get investors as they were still unable to break even. It remained to be seen how the founders of GREEN WATECH would achieve their expansion goals and help people at the BoP in other developing countries.

This case study is suited to the Master of Business Administration/Master of Science and executive program.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

After completion of the case study, students will be able to identify the traits required in child leadership and the ability to apply “The Whole Leadership Framework” child leadership model today, identify and discover opportunities to promote child leadership and analyse its sustainable impact and analyse how innovation clubbed with sustainability will create a competitive advantage with special reference to the innovative ultraviolet-C light sterilisation Suraksha Box.

Aditya Pachpande was a child prodigy of India, who had stunned the world with his trailblazing attitude ever since the tender age of 12. Aditya’s father, Sandeep Pachpande, a Harvard alumnus, wondered – “My son is ahead of his time. Would institutions ever acknowledge my innovative boy as a child leader? Will my child become a teen chief executive officer (CEO)? Will he ever get accepted?” Aditya leads by example as a student, changemaker, edupreneur, innovator and keynote speaker. He thinks, “Age is just a number”, but has had to shout out loud to be heard. With the nickname “Lecture man” given by his teachers and peers, he went on to contribute in endorsing skill-based experiential and discovery-based teaching-learning that addresses real-world issues and sustainable development goals. A CEO at the age of 11 years, he co-founded NextGenInnov8 Global Solutions Private Limited and NextGenInnov8 Social Foundation. Although achieving these milestones, he had to manoeuvre through several curve balls hurled at him by the system. Not the one to ever compromise on ethics, values and purpose, today he was at the crossroads – whether he should choose social change over-commercialisation of his business, simplicity and minimalism over product perfection, crowdfunding over loans or angel investors, manufacture in China or make in India just to name a few. The unstoppable Aditya, aspiring for acceptance, dreamt that someday, these policymakers and businesses would acknowledge child innovators and not write them off just because they were adolescents. Aditya, standing on a precipice, dreamt along.

This case has been particularly focused on postgraduate-early stage-level students pursuing business or entrepreneurial education-related programs.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

By the end of the lesson, students should be able to identify and think critically about common business problems and come up with possible solutions, explain how a business owner’s attributes can influence the business decisions they make, use available information to assess the viability and sustainability of a business model/strategy, determine the strengths and weaknesses of a particular marketing strategy and suggest ways to improve it and use the information provided to evaluate the risks and benefits of business growth strategies and determine their appropriateness for specified circumstances.

Mambokadzi is a small business with considerable potential in Zimbabwe’s beauty and personal care industry. The case study spans several years, highlighting Sharon Chingwaro’s journey as she navigates the difficulties of starting and growing a business with limited resources. The case study delves into various aspects of running a small business, such as production, marketing, distribution, human resources and intellectual property. It also discusses the value of resilience and endurance, as well as the need for resourcefulness when starting and growing a business under difficult circumstances. This case study is intended to teach entrepreneurship and marketing strategies to both under- and postgraduate students, with a particular emphasis on the difficulties of starting and growing a business in a limited-resource environment. It has applications in a variety of fields, including entrepreneurship, strategic management and marketing.

This case study is suitable for undergraduate and postgraduate students.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

The case study aims to help students/learners to analyse the role of perception and its linkage to an entrepreneur’s decision-making process in setting up a social entrepreneurship venture during the COVID-19 pandemic without any prior entrepreneurial experience; understand the definition and meaning of social enterprises based on concepts/theories of social entrepreneurship; identify if AgriVijay fits the outline of a social enterprise based on its vision, challenges faced and journey as an agriculture-based technology-oriented social venture (AgTech SE); and outline the future path of AgriVijay as an independent business (post its incubation support period) using suitable strategy and funding models related to for-profit social enterprises.

This case study details the fascinating journey of a social AgTech venture – AgriVijay – through the perspectives of the protagonist Vimal Panjwani, a budding agri-business entrepreneur. Fuelled by a desire to empower the farming communities, Panjwani with the support of his dynamic mother, Shobha Chanchlani, embarked on the challenging task of crafting a business model that sought to merge community welfare with profitable enterprise. The case study illuminates the protagonist's background, revealing Panjwani’s motivations, risk-taking tendencies and the pivotal role played by his co-partner and mother, Chanchlani. It also highlights the challenges encountered by the protagonist in setting up a technology-based social entrepreneurship venture along with its success in making a social impact across marginalised farming communities. Through all this, the case study also highlights the major dilemma of the protagonist – that of continuing to balance AgriVijay’s core mission of “empowering the farmers” with profitability and long-term growth beyond its limited incubation support period, and his own dilemma of venturing into a social enterprise as a start-up venture without any prior entrepreneurial experience. The case study through its narrative encourages the readers/learners to understand the evolving dynamics of a nascent social entrepreneurial venture in a developing economy and how such a balanced model can actually be the harbinger of social impact and change in similar economies with large rural farming and marginalised communities.

The case study is most suitable for postgraduate management, weekend executive learning or distance learning students in agri business, sustainable business, social entrepreneurship and allied management domains. It can be used for teaching and learning topics related to entrepreneurship, new venture strategy, leadership and motivation, with a specific focus on agriculture business, agricultural entrepreneurship, social entrepreneurship and sustainable ventures.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.