Case studies

After completion of the case study, the students will be able to understand lead and lag indicators, understand job performance and its linkage with job satisfaction, calculate the cost of turnover and design solutions to the problem of attrition and low satisfaction.

Pace Control Gears was a small-scale enterprise based out of Sonipat, India. It was an entrepreneurial venture by Rajesh Kumar, who had set Pace in 2010 to manufacture low-voltage electrical apparatus. Recently, Pace had begun to experience issues with quality control that were largely the result of human error. The company was facing a drop in satisfaction levels and higher attrition levels among the employees. Kumar had to find a solution quickly to address the problem, as it had direct implications for the company’s margins and the assurance of quality that it was associated with in the market.

This case study is suited to undergraduate and postgraduate courses in human resource management and general management.

Teaching notes are available for educators only.

CSS 6: Human Resources Management.

The learning outcomes are as follows: to identify and analyze the importance of operations management in a situation demanding minimizing environmental impact and maintaining operational momentum; access the risks faced during project executions and apply project management concepts to facilitate Karachi Steel in implementing indigenous technological solutions; and evaluate the importance of adaptability, continuous improvement and innovation in creating sustainable solutions to address complex challenges.

Javaid Iqbal, CEO of Karachi Steel, was the case’s protagonist. With capacity expansion, Javaid relocated the steel facility from Rawalpindi to Islamabad, Pakistan. The company encountered several difficulties because of the air emissions’ inconvenience to nearby residents and the strict environmental regulations. To push the emissions into the air, the company first installed a locally fabricated chimney. Later, they hired a foreign Pakistani engineering firm to install air filters, but the project proved unsuccessful. To control emissions, the company developed a Wet Particulate Control (WPC) system based on a water-sprinkling mechanism. The endeavor was successful, but it resulted in water pollution. As a result, Karachi Steel signed a contract with a local engineering company that invented and effectively installed an air filtration system. Karachi Steel not only devised solutions for their predicaments but also made significant contributions toward achieving the Sustainable Development Goals (SDGs). However, the emissions reporting and monitoring mechanism continued to cause inconvenience for regulators. In addition, the filtration facility encountered a blocked duct conveying zinc sulfate from smoke, resulting in the periodic suspension of operations. As Karachi Steel seek long-term solutions to current challenges, it is critical to examine the relationship between internal circumstances and external forces and stimulate a holistic approach to resolving issues within the realms of operations management and project management.

The case study is suitable for students pursuing their undergraduate degree programs in business studies or management sciences. This case can be taught in specific subjects in the domain of management sciences, including project management and operations management. Furthermore, undergraduate students pursuing degrees in environmental sciences, specializing in environmental impact assessment and sustainable development, can also learn from this case study. These subjects have the potential to provide students with a detailed understanding of the dynamic relationship between environmental problems caused by business activities, and how to address these challenges using principles of project management and operations management. There is no pre-requisite for this case study, and the level of difficulty is moderate. The recommended teaching pedagogy for this multidisciplinary case study includes role-playing exercises, simulations to replicate real-world situations and the Socratic method, which encourages critical thinking.

Teaching notes are available for educators only.

CSS 7: Management Science.

The primary learning objectives/outcome of case discussion is to apply design thinking principles to design innovative and socially responsible strategies that promote financial sustainability for organizations serving unique societal needs. The secondary learning objectives/outcome of case discussion is to gain a deeper appreciation for the potential social impact of their innovative ideas and understand the complexities and ethical considerations in social entrepreneurship, especially when working with individuals with special needs.

The case study describes the challenge facing Anil Kumar Kundra, the founder and trustee of Autism Ashram and Autism Guardian Village in Hyderabad and Gujarat, an organization that provides shelter and care for individuals with autism and residential facilities for their parents. Autistic individuals often lack social skills and may face challenges in reading, writing and communicating. In addition, they may experience behavioral issues, making it difficult for them to obtain employment or run their own ventures, resulting in a lifetime financial dependency on their guardians. In August 2023, Kundra, in pursuit of sustainability, aims to empower autistic individuals in the ashram to attain financial independence. He envisions Autism Ashrama as a self-sustaining entity, no longer dependent on contributions from parents. The dilemma facing Kundra is the need to identify innovative ideas that will enable these autistic individuals to contribute to revenue generation. The challenges faced by autistic individuals in their day-to-day lives make Kundra’s decision-making complex. While he acknowledges the challenge, he firmly believes that a handful of transformative ideas can bring about a revolutionary shift in the ecosystem for autistic individuals, rendering this business model truly sustainable. The case study invites students to help Kundra identify innovative ideas using design idea techniques, such as the Stanford d.school model.

This take-home assignment is suitable for both undergraduate and postgraduate students and is designed to explore the integration of sustainable business practices and design thinking in a real-world context.

Teaching notes are available for educators only.

CSS 7: Management science.

After reading the case and answering the case assignments, students will be able to understand and explain the challenges and opportunities for engineering, procurement and construction (EPC) contractors and their subcontractors; understand and critically analyse the advantages and disadvantages of insourcing and outsourcing of engineering, procurement and construction in EPC projects; determine which situations merit insourcing or outsourcing within each of engineering, procurement and construction in EPC projects; understand and identify the competencies and qualifications that a subcontractor must possess if any EPC activity is outsourced to them; and develop a decision-making framework to determine which EPC activities must be kept in-house or outsourced in EPC projects.

In mid-March 2021, PetroSahand International Group, a leading EPC contractor specializing in the oil, gas and petrochemicals industries in Iran, encountered significant challenges with its subcontractors in engineering and construction. These issues resulted in widespread repercussions for the company, including project delays and mounting debts. At the peak of these crises, PetroSahand’s senior management embarked on a thorough examination of whether to insource or outsource various aspects of their operations, such as engineering, procurement and construction. Their objective was twofold: to prevent similar setbacks in future projects and to navigate existing projects with minimal disruption to the company’s reputation. To address this critical dilemma, PetroSahand enlisted the expertise of a consulting team from Sharif University of Technology. Comprising esteemed professors, graduates and students from one of Iran’s most respected institutions, this team undertook an exhaustive analysis of the insourcing versus outsourcing debate across EPC domains. Subsequently, they presented their comprehensive findings, thereby confronting PetroSahand’s senior management with a pivotal choice regarding the optimal approach for each activity.

The audience of this work is undergraduate and graduate students who are enrolled in project management courses, both fundamentals and advanced. In addition, this case helps senior managers of EPC contractors gain a deeper and more comprehensive understanding of insourcing or outsourcing different project activities.

Teaching notes are available for educators only.

CSS 7: Management science.

The case describes a hypothetical hedge fund manager who is examining whether to invest in bitcoin. The case discusses potential risks and rewards of investing in bitcoin, the role of bitcoin and digital currencies more broadly, and financial innovation in the space, such as ICOs. It can be taught as part of a second-year MBA elective course in investments, financial institutions/capital markets, or fintech.

Few cases allow the student to understand the relationship between brand strategy, marketing strategy, implementation, and analysis. While some conceive of the process as being sequential, this case demonstrates that in fact, this process is more fluid, and that implementation and analysis impact subsequent strategy.

This field-based case provides a rare glimpse into the turnaround of a brand that was all but dead. After Buick suffered more than five decades of declining business results and an inferior brand image versus all rivals, few thought that the brand could be resuscitated. This case provides a valuable under-the-hood look at how the Buick team, over time, progresses through a series of marketing improvements all anchored on an evolved strategy. Specifically, Buick introduced a shift in brand strategy behind an evolved brand essence statement (i.e., brand positioning), improved product lineup, new-to-the-world innovation, enhanced dealership service, and more compelling advertising. The results led to a record number of product awards, significantly improved advertising measures, improved service ratings, and better business results.

Despite significant improvement across multiple dimensions of the business, Buick still trailed key competitors on one of the most important measures Buick tracked—the brand momentum rating—suggesting that there was still more work needed to complete the brand turnaround. The case introduces Molly Peck, the new marketing director on Buick, who is wondering what more, if anything, Buick should do. The material allows for instruction around marketing strategy and the process of converting it into implementation through the use of a creative brief.

This case replaces UVA-M-0837. It can be used in a variety of marketing and strategy classes to understand how (1) at a macro level, a shift in consumer and environmental factors can impact firm strategy and (2) at a micro level, an e-mail-based marketing campaign designed to address these changes can impact firm-level performance.

The case puts the students in the position of CEO Robert Huth as he is preparing for a board meeting. He had taken David's Bridal from a loss in 1996 to sales of over $1 billion by 2011, but he was concerned about future growth. People were waiting longer and longer to get married and, once they decided to, were spending much less than in the past, so the industry had seen year-over-year declines since 2007. How would David's Bridal establish its brand in the minds of a new generation of brides who shopped, purchased, and decided differently than had brides in past generations?

This public-sourced case describes the latest restructuring efforts by Deutsche Bank (DB) and gives a short history of prior restructuring efforts from the decade before. In July 2019, Christian Sewing, the new CEO of DB, announced a series of measures that included, among others, the elimination of global equity trading, the layoff of 18,000 employees, the creation of a “bad bank” to transfer noncore assets, and the suspension of dividends until 2022. The case describes key decisions a bank CEO makes when a bank needs to change course to return to profitability and growth. The case offers an opportunity to debate these key decisions, as well as discuss some of the prior ones during earlier restructuring efforts, and put the students in the CEO's shoes: What would you do and why? The case also describes key banking performance metrics (e.g., ROE, ROA) and other critical variables such as those reflecting capital health (Tier 1 ratio), as well as gives an overview of the bank business model and factors impacting bank profitability and value.

This case teaches students the importance of maintaining a strong FICO score by illustrating the consequences of paying bills late or not at all. The protagonist is David Molina, a waiter at a struggling Italian restaurant located down the block from where he lives. Money is tight for Molina right now—his limited income means he lives paycheck to paycheck. However, Molina knows things will be looking up for him soon because he recently accepted a job as a bank teller across town—his first desk job.

Molina has been putting off paying two of his bills: a cable bill and his Bank of America credit card bill, both of which are late and have been issued, this time, in the form of threats to impact Molina's credit score if he doesn't pay them. He has just enough money to afford the minimum payments on each overdue bill. But then he receives a phone call from his friend, Jim Lindsey, reminding him about an invitation to go to Myrtle Beach for the upcoming weekend. Molina knows he cannot afford it, but a woman he's attracted to, Jessica, will be there too. Should Molina put off the bills yet again, and if so, how exactly will being late on them hurt his credit score?