Case studies

The learning outcomes are as follows: to analyse the issue(s) presented within specific case study context (C4); to formulate solutions to identified issue(s) within specific case study context (C5); and to synthesise a group plan to solve issue(s) within specific case study context (A4).

In 2017, China proclaimed that it would no longer accept plastic waste for recycling, this was in-line with China’s Operation “National Sword” to review the quality of these plastic imports to ensure their recyclability. This sent shock waves through a now globalised recycling network, with China previously having imported 95% of the EUs and 70% of US plastics that had been collected for recycling. This plastic backlog was then diverted to South-East Asian nations, particularly Malaysia, which this case focuses the discussion upon. While the potential for significant economic benefits drew the attention of illegitimate and unscrupulous businessmen alike, the environmental degradation from the often, low technological recycling processes and even burning of low-grade plastics brought profound negative impacts. This case focuses upon, then Minister, Yeo Bee Yin who led the Ministry of Energy, Science, Technology, Environment and Climate Change, in which she took an active and aggressive stance in attempt to stop Malaysia becoming the dumping ground for the global plastic crisis.

This case is appropriate for final year undergraduate and any postgraduate degrees in Business.

Teaching notes are available for educators only.

CSS 4: Environmental Management.

After completion of the case study, the students will be able to discuss how social entrepreneurs identify problems and convert them into opportunities, analyze the challenges faced by social entrepreneurs in setting up and growing a new venture and formulate an expansion strategy for a startup.

Over 2.6 billion people worldwide needed access to sanitation services, and most of them stayed in rural areas. Lack of access to sanitation had several negative consequences. In the Middle East North Africa (MENA) region, sanitation was one of the major challenges, with 66 million people still lacking basic sanitation facilities. Additionally, a very small proportion of the wastewater was properly treated. This lack of access to sanitation was a major barrier to economic development and poverty reduction. Out of the 17 most water-stressed countries in the world, 11 were in the MENA region. About 15 million people in rural Morocco did not have a proper and sustainable sanitation system. However, there was an enormous opportunity to use wastewater as a resource. The global market for wastewater treatment services was valued at US$53bn in 2021, and it was expected to grow to more than US$71bn by 2026. Two Moroccan scientists – Dr Salma Bougarrani and Dr Lahbib Latrach, who were born and brought up in Morocco and had seen the wastewater problem very closely, decided to help the people at the bottom of pyramid (BoP) after completing their PhD in environment and water treatment technologies and multisoil-layering technology. They founded GREEN WATECH, a social enterprise, in 2018, which provided a low-cost, efficient and practical solution for wastewater management in the rural areas of Morocco. GREEN WATECH won many awards and cash prizes for its product and business plan. The company had already reached five regions of Morocco and positively impacted the lives of thousands of Moroccans. The founders were planning to expand to areas in the rest of Morocco and other African and Middle East countries. GREEN WATECH had the potential to significantly impact the lives of people in rural areas and help improve wastewater management systems in developing countries through its patented technology. However, the founders faced several challenges in making their dream a reality. They needed a bigger team to expand to different locations and countries but were finding it difficult to get the right people. They also needed funds to expand their geographical reach but found it tough to get investors as they were still unable to break even. It remained to be seen how the founders of GREEN WATECH would achieve their expansion goals and help people at the BoP in other developing countries.

This case study is suited to the Master of Business Administration/Master of Science and executive program.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

The learning outcomes are as follows: determine the conditions founders encounter when their company is not on the right track; examine the importance of ethics in entrepreneurship; draw up a broad framework to understand the degree of trouble an organization is in and how far it has gone since the early warning signs of trouble; and formulate a comprehensive solution for entrepreneurial founders to extricate their ventures from a crisis.

India-based Edtech company Byju’s was facing a slew of challenges as of mid-2023. Its founder and CEO Byju Raveendran needed to steer the company out of trouble.

Post Graduate/Executive Education.

Teaching notes are available for educators only.

CSS3: Entrepreneurship.

The learning outcomes are as follows: to identify and analyze the importance of operations management in a situation demanding minimizing environmental impact and maintaining operational momentum; access the risks faced during project executions and apply project management concepts to facilitate Karachi Steel in implementing indigenous technological solutions; and evaluate the importance of adaptability, continuous improvement and innovation in creating sustainable solutions to address complex challenges.

Javaid Iqbal, CEO of Karachi Steel, was the case’s protagonist. With capacity expansion, Javaid relocated the steel facility from Rawalpindi to Islamabad, Pakistan. The company encountered several difficulties because of the air emissions’ inconvenience to nearby residents and the strict environmental regulations. To push the emissions into the air, the company first installed a locally fabricated chimney. Later, they hired a foreign Pakistani engineering firm to install air filters, but the project proved unsuccessful. To control emissions, the company developed a Wet Particulate Control (WPC) system based on a water-sprinkling mechanism. The endeavor was successful, but it resulted in water pollution. As a result, Karachi Steel signed a contract with a local engineering company that invented and effectively installed an air filtration system. Karachi Steel not only devised solutions for their predicaments but also made significant contributions toward achieving the Sustainable Development Goals (SDGs). However, the emissions reporting and monitoring mechanism continued to cause inconvenience for regulators. In addition, the filtration facility encountered a blocked duct conveying zinc sulfate from smoke, resulting in the periodic suspension of operations. As Karachi Steel seek long-term solutions to current challenges, it is critical to examine the relationship between internal circumstances and external forces and stimulate a holistic approach to resolving issues within the realms of operations management and project management.

The case study is suitable for students pursuing their undergraduate degree programs in business studies or management sciences. This case can be taught in specific subjects in the domain of management sciences, including project management and operations management. Furthermore, undergraduate students pursuing degrees in environmental sciences, specializing in environmental impact assessment and sustainable development, can also learn from this case study. These subjects have the potential to provide students with a detailed understanding of the dynamic relationship between environmental problems caused by business activities, and how to address these challenges using principles of project management and operations management. There is no pre-requisite for this case study, and the level of difficulty is moderate. The recommended teaching pedagogy for this multidisciplinary case study includes role-playing exercises, simulations to replicate real-world situations and the Socratic method, which encourages critical thinking.

Teaching notes are available for educators only.

CSS 7: Management Science.

After completion of the case study, students will be able to discuss the characteristics of sustainable enterprises driving the innovation; analyze the concept of waste to wealth, along with its associated benefits and challenges; provide an example of a sustainable start-up that operates conventionally and is attempting to increase production capacity through automation; and describe the strategies for scaling up the business.

Mr Manigandan Kumarappan’s goal was to provide the world with alternatives to plastic and other nonbiodegradable articles used in homes, offices, hotels and other places which compelled him to leave his corporate life behind and become an entrepreneur. His knowledge, expertise and creativity made him work toward providing a sustainable solution to the plastic-free world which made him create leafy straws for the world. His start-up Evalogia made 10,000 straws a day, mostly with manual production and machine-assisted in part of the processes. Evalogia got orders from all over the world after the ban on plastic from many countries. However, Evalogia was unable to meet the demand, as the manufacturing process mostly depended on manual production at present. Hence, the company planned to scale up its production capacity from 10,000 straws per day to 100,000 straws to meet the demand through automation or by increasing the production units to meet the growing demand from domestic and international markets. Kumarappan wondered if increasing the number of manufacturing facilities would make it harder to hire new staff, manage existing ones, train them and provide overall supervision; if these tasks were not completed well, the product’s quality and, subsequently, its demand, might suffer. The automation process required huge investment, time and a great deal of skepticism for its success. Kumarappan was stuck over whether to add more production units or automate the process to increase production.

This case study is suitable for graduate students.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

This case study is tailored for audiences engaged in subjects such as entrepreneurship, strategy and foundational marketing principles. The academic focus aligns with the business model conceptualized by Osterwalder and Pigneur. This case study targets both undergraduate and graduate students at the university level, catering to interdisciplinary groups enrolled in courses related to entrepreneurship, strategy, marketing fundamentals and more. The objective is to equip students with the skills to construct diverse business models based on various potential alternatives. This case’s adaptable design and straightforward cost and revenue formulation facilitate comprehension for nonbusiness students, enabling them to grasp the multifaceted dimensions of a business model and project figures using basic arithmetic.

Fookifun emerged as a company born from Mrs Alejandra Padilla’s insightful grasp of the market. With the initial investment from her husband, she initiated a venture focused on delivering high-quality theatrical performances for children in the city of Barranquilla, situated in the northern region of Colombia. This narrative unfolds through early scenarios, illustrating the strategic decisions made by the entrepreneurs and the meticulous calculation of their costs and expenses. Alejandra steered her enterprise from 2014 to 2017, navigating through various alternatives and their associated costs. The narrative delved into 2017, depicting Alejandra’s pivotal decision-making process. Faced with the challenge of insufficient profitability, she contemplated the sustainability of the business. This period prompted her to reassess whether to persist with modifications or relinquish the venture altogether. The crux of Alejandra’s dilemma laid in the business’s meager profitability, which failed to generate adequate income for sustainability. It became imperative for her to make informed decisions, identifying modifiable variables within the business model and assessing their potential impact, particularly on the income generation model. This case study is tailored for audiences engaged in subjects such as entrepreneurship, strategy and foundational marketing principles. The academic focus aligns with the business model conceptualized by Osterwalder and Pigneur.

Given the characteristics of this case, it can be used for the teaching and learning of business or business administration, marketing, economics or related students, at higher or postgraduate levels (graduate school).

Teaching notes are available for educators only.

CSS3: Entrepreneurship.

After completion of the case study, the students will be able to make strategic decisions for social entrepreneurship and carry out a sustainability and social impact analysis, assess the benefits of a circular economy-based retail model and investigate ways to preserve these benefits and recognize the ethical and sustainable issues facing the fast fashion sector and how social enterprises are addressing them.

The culture of fast fashion had proven to be dangerous for the environment as it had promoted a culture of consumerism and materialism. It had also increased the landfills in different countries. The need of the hour was to upcycle used and unwanted clothes into new innovative items. This idea had been practically implemented by Mrs Sujata Chatterjee of the Twirl Store, the protagonist of this case study. Chatterjee was a social entrepreneur who recognized the environmental and social problems caused by rapid fashion and abandoned apparel in landfills. She launched the Twirl Store, a social enterprise with the mission of advancing circular economy and sustainability practices in the textile sector. Rural women were economically and culturally empowered by the enterprise’s upcycling of used clothing using their abilities, and a sustainable source of income was created. Finding abandoned clothing, sorting and processing it effectively and locating clients who share her commitment to sustainability were difficult tasks for Chatterjee. Despite the difficulties, the Twirl Store served as an example of how circular economy concepts, cultural sustainability and women’s empowerment might be combined, highlighting the importance of social entrepreneurship in addressing global concerns and fostering positive social effects and economic impact.

This case study is applicable for undergraduate as well as post graduate students of management studies.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

After completion of the case study, students will be able to analyse the path of the entrepreneurship from idea generation to market development to scaling up business, examine the impact of start-ups like Ergos on India’s agriculture value chain, discuss the challenges faced by tech entrepreneurs in growing a business, identify problems solved by Grain Bank Model and evaluate digitisation of farming’s custodial services such as warehousing, market linkages and loans.

The case study discusses how founders of Ergos, India-based leading digital AgriTech start-up, Kishor Kumar Jha and Praveen Kumar, started one of the unique models in the AgriTech landscape in India. After noticing the grim condition of small and marginal farmers in Bihar, India. Kishor and Praveen decided to put their banking and corporate experience to use in the farming sector. Ergos aimed to empower farmers by providing them with a choice on when, how much quantity, and at what price they should sell their farm produce, thus maximising their income. As a result, Ergos launched the grain bank model, which provided farmers with doorstep access of end-to-end post-harvest supply chain solutions by leveraging a robust technology platform to ensure seamless service delivery. Ergos faced many challenges in its journey related to financing, marketing and distribution. Amidst these developments, it remained to be seen how Kishor and Praveen would be able to realise their goal to serve over two million farmers across India by 2025 and create a sustainable income for them through its GrainBank Platform.

This case study was written for use in teaching graduate and postgraduate management courses in entrepreneurship and business strategy.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship

After completion of the case study, students will be able to identify the traits required in child leadership and the ability to apply “The Whole Leadership Framework” child leadership model today, identify and discover opportunities to promote child leadership and analyse its sustainable impact and analyse how innovation clubbed with sustainability will create a competitive advantage with special reference to the innovative ultraviolet-C light sterilisation Suraksha Box.

Aditya Pachpande was a child prodigy of India, who had stunned the world with his trailblazing attitude ever since the tender age of 12. Aditya’s father, Sandeep Pachpande, a Harvard alumnus, wondered – “My son is ahead of his time. Would institutions ever acknowledge my innovative boy as a child leader? Will my child become a teen chief executive officer (CEO)? Will he ever get accepted?” Aditya leads by example as a student, changemaker, edupreneur, innovator and keynote speaker. He thinks, “Age is just a number”, but has had to shout out loud to be heard. With the nickname “Lecture man” given by his teachers and peers, he went on to contribute in endorsing skill-based experiential and discovery-based teaching-learning that addresses real-world issues and sustainable development goals. A CEO at the age of 11 years, he co-founded NextGenInnov8 Global Solutions Private Limited and NextGenInnov8 Social Foundation. Although achieving these milestones, he had to manoeuvre through several curve balls hurled at him by the system. Not the one to ever compromise on ethics, values and purpose, today he was at the crossroads – whether he should choose social change over-commercialisation of his business, simplicity and minimalism over product perfection, crowdfunding over loans or angel investors, manufacture in China or make in India just to name a few. The unstoppable Aditya, aspiring for acceptance, dreamt that someday, these policymakers and businesses would acknowledge child innovators and not write them off just because they were adolescents. Aditya, standing on a precipice, dreamt along.

This case has been particularly focused on postgraduate-early stage-level students pursuing business or entrepreneurial education-related programs.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

The case study aims to help students/learners to analyse the role of perception and its linkage to an entrepreneur’s decision-making process in setting up a social entrepreneurship venture during the COVID-19 pandemic without any prior entrepreneurial experience; understand the definition and meaning of social enterprises based on concepts/theories of social entrepreneurship; identify if AgriVijay fits the outline of a social enterprise based on its vision, challenges faced and journey as an agriculture-based technology-oriented social venture (AgTech SE); and outline the future path of AgriVijay as an independent business (post its incubation support period) using suitable strategy and funding models related to for-profit social enterprises.

This case study details the fascinating journey of a social AgTech venture – AgriVijay – through the perspectives of the protagonist Vimal Panjwani, a budding agri-business entrepreneur. Fuelled by a desire to empower the farming communities, Panjwani with the support of his dynamic mother, Shobha Chanchlani, embarked on the challenging task of crafting a business model that sought to merge community welfare with profitable enterprise. The case study illuminates the protagonist's background, revealing Panjwani’s motivations, risk-taking tendencies and the pivotal role played by his co-partner and mother, Chanchlani. It also highlights the challenges encountered by the protagonist in setting up a technology-based social entrepreneurship venture along with its success in making a social impact across marginalised farming communities. Through all this, the case study also highlights the major dilemma of the protagonist – that of continuing to balance AgriVijay’s core mission of “empowering the farmers” with profitability and long-term growth beyond its limited incubation support period, and his own dilemma of venturing into a social enterprise as a start-up venture without any prior entrepreneurial experience. The case study through its narrative encourages the readers/learners to understand the evolving dynamics of a nascent social entrepreneurial venture in a developing economy and how such a balanced model can actually be the harbinger of social impact and change in similar economies with large rural farming and marginalised communities.

The case study is most suitable for postgraduate management, weekend executive learning or distance learning students in agri business, sustainable business, social entrepreneurship and allied management domains. It can be used for teaching and learning topics related to entrepreneurship, new venture strategy, leadership and motivation, with a specific focus on agriculture business, agricultural entrepreneurship, social entrepreneurship and sustainable ventures.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

After reading and discussing this case study, students will be able to explain the concept of diffusion of innovation and predict how the passion fruit-infused vinaigrette (PFIV) might spread throughout the Thai market; analyze the market environment for condiments in Thailand and identify specific opportunities that Preedha Vinchit and her team should consider for the successful launch of the PFIV; interpret both qualitative and quantitative data gathered by the new product development (NPD) team and discuss its implications for the product’s market strategy and development; and critique the initial launch plan proposed by Krit Anon, suggest practical strategies and calculate the break-even point necessary to meet the project’s financial goals.

During July 2023, Vinchit, product marketer at the Thani Food Institute (TFI), faced a critical decision regarding the launch of the APFIV. Developed from TFI’s patented passion fruit peel powder, the PFIV offered functional benefits and addressed the sustainable use of passion fruit resources. As COVID-19 restrictions eased, TFI’s board of advisors anticipated a successful market entry for PFIV. Anon, culinologist and chef behind PFIV’s formulation, expressed keen interest in launching it independently with a startup investment of THB 500,000 (US$14,388). Vinchit, with market research and home-use test results indicating positive consumer reception in hand, contemplated whether to proceed with a launch plan of TFI’s design or endorse Anon’s entrepreneurial venture. Critical considerations included market viability, strategic partnerships, target demographics and marketing strategies encompassing pricing, distribution and promotional campaigns. The decision hinged on maximizing PFIV’s market potential amidst Thailand’s robust condiment consumption and growing health awareness.

This case study can be used in undergraduate and graduate courses in entrepreneurship, food product development, marketing strategy, market research and innovation on topics including NPD, opportunity identification, concept testing, consumer research analysis, marketing strategy formulation, business/financial analysis and launch strategies. This case study may be more useful in the middle or later parts of a course or module when an instructor is focusing on any or all stages of the NPD process and the strategic decisions, particularly for aspiring entrepreneurs with limited resources. Additionally, students should have developed at least some preliminary understanding of qualitative and quantitative research methods. This case study has been very effective in demonstrating various organizational processes and decision-making tools, which allow students to apply strategy frameworks and systematically evaluate several alternatives.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

After completion of the case study, the students will be able to analyze the FinTech industry in emerging markets, distinguish the growth strategies for startups in the hyper-growth phase, using the Ansoff matrix, evaluate and select geographical markets for expansion (foreign country selection) and understand the liability of foreignness concept.

In 2015, Islam Shawky, Alain Al-Hajj and Mostafa Menessy founded Paymob in Egypt, a FinTech start-up providing technological and financial solutions to consumers and merchants in the country. The company had grown into one of Egypt’s most prominent digital payment providers by deploying infrastructure and technologies that empower the underserved with access to financial services. In 2021, Paymob had gained a lot of support from venture capital investors that ended with closing the largest in Egypt Series A fund of $18.5m led by Dubai-based venture capital firm Global Ventures. Although Paymob had already reached great success in Egypt, the founders’ vision was to become the regional leader of digital payments, focusing on small and medium-sized enterprises. So, they are considering regional markets similar to Egypt’s, such as the Kingdom of Saudi Arabia, a call with a lot of structure but a lot of competition, and Pakistan, a market with much less competition but relatively unstructured. The founders found themselves in early 2022 deciding between these two markets in preparation for the next round of Series B $50m funding.

This case study can be useful for courses in executive education.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

By the end of the lesson, students should be able to identify and think critically about common business problems and come up with possible solutions, explain how a business owner’s attributes can influence the business decisions they make, use available information to assess the viability and sustainability of a business model/strategy, determine the strengths and weaknesses of a particular marketing strategy and suggest ways to improve it and use the information provided to evaluate the risks and benefits of business growth strategies and determine their appropriateness for specified circumstances.

Mambokadzi is a small business with considerable potential in Zimbabwe’s beauty and personal care industry. The case study spans several years, highlighting Sharon Chingwaro’s journey as she navigates the difficulties of starting and growing a business with limited resources. The case study delves into various aspects of running a small business, such as production, marketing, distribution, human resources and intellectual property. It also discusses the value of resilience and endurance, as well as the need for resourcefulness when starting and growing a business under difficult circumstances. This case study is intended to teach entrepreneurship and marketing strategies to both under- and postgraduate students, with a particular emphasis on the difficulties of starting and growing a business in a limited-resource environment. It has applications in a variety of fields, including entrepreneurship, strategic management and marketing.

This case study is suitable for undergraduate and postgraduate students.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

After completion of the case study, the students will be able to[1] review the industry analysis using Porter’s five forces and strength, weakness, opportunities, threats framework and understand how a firm can achieve a competitive advantage, analyze the stakeholder theory and the salience of stakeholder mapping for enterprises with large number of stakeholders, apply the Mendelow framework of stakeholder mapping in this context and integrate it with stakeholder engagement for small enterprises and examine and evaluate how new age enterprises can engage better with stakeholders to provide a higher value creation.

Ayushi Srivastava started her enterprise, Beeyond Foods, in early 2021 with the aim to provide unadulterated, raw honey to consumers. She also wanted to help the beekeeping community by providing the beekeepers with a fair price for the procurement of honey from the bee hives. Beeyond Foods was a small enterprise in India that sold two variants of honey to consumers. The first variant was sourced from the Himalayan region of India, whereas the second was sourced from the Western Ghats of India. The primary distribution channel was trade fairs, where Srivastava would assemble her stall and sell honey to potential customers. Furthermore, a part of the sales was also driven by an electronic channel, which was through the company website. Customers could place their orders, and the honey would directly be delivered to their homes. With a successful start to the business, Srivastava was interested to scale her business and reach more customers. However, she was mindful that there were multiple stakeholders involved in the business. Srivastava had to study the values and needs of each stakeholder, while simultaneously formulate a strategy to expand her reach. This case study is designed to teach the concept of stakeholder value creation for small business enterprises.

This case study is well suited for an entrepreneurship and strategy course at the postgraduate (Master of Business Administration) level. This case study can also be taught in a marketing course.

Teaching notes are available for educators only.

CSS3: Entrepreneurship.

The case study can be used for the course of entrepreneurship and is appropriate for postgraduate students. Discussion would be the most appropriate method for teaching this case study. Through Nutan’s words, students could gain a first-hand glimpse into the transformative journey of a rural woman entrepreneur.

In 2018, Nutan Jha embarked on a remarkable journey by establishing Nutan Creations, a micro-enterprise situated in Kharrak village, Jhanjharpur, Bihar (India). This case study aims to achieve multiple objectives: understanding the operational obstacles confronted by a rural woman entrepreneur, acknowledging the inseparable connection between business and social issues in rural contexts, moreover shedding light on the intersection of gender, entrepreneurship and cultural preservation through traditional Madhubani painting art form products. This distinctive combination brings a fresh perspective to the research, offering unique insights into the challenges and triumphs experienced by rural women entrepreneurs. The findings of this case study exemplify the intricate interplay between business and social concerns in rural areas, portraying an inspiring depiction of how determination, adaptability and robust support networks can conquer hurdles and foster transformative changes.

The case study has been designed for the students of business administration and entrepreneurship who have completed their elementary model on marketing comprehend. The students should need to understand the concept of entrepreneurship and the basics of digital marketing strategy to ensure effective learning.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

After reading and analyzing this case study, students will be able to describe the challenges of creating an electric vehicle (EV) start-up with the objective of zero-carbon emissions, identify opportunities and challenges for Satyadarshan Technologies & Services (STS) in enhancing the B2B customer base and sales volumes in the EV market, identify and assess government incentives to reinforce STS’s existing EV business and compose an understanding of and determine an ability to use various industrial marketing and promotion strategies for STS in the present environment.

STS was launched in 2020 to provide environmentally conscious urban commuting. Himanshu Purohit, the founder of STS, commenced an e-bicycle assembly unit and produced the first advanced electric drivetrain technology. The vision was to transform how people viewed mobility and make EVs the standard for a healthier globe. Nurturing a start-up with zero-carbon emissions was tedious due to limited infrastructure, high costs, low market acceptance and supply chain constraints. With the relentless pursuit of excellence, STS constantly pushed the boundaries and crossed the break-even ceiling in the year 2022. As a budding player in the souk, the company expected to gain a strong presence in the EV market with particular attention to the B2B customer segment. At the same time, the company aimed to ensure business sustainability by leveraging government incentives. The company needed to expand its corporate sales volume and craft a sustainable competitive advantage. Purohit recognized various challenges to the sustainability of STS that stood between the company's goals and their realization, particularly in achieving a sustainable move in the EV segment. Consequently, Purohit found himself at a critical juncture to pave the path toward the growth of the start-up. Eventually, analysis of the company's business challenges, industrial marketing and promotional strategies required strategic planning to appraise and evaluate the business model.

This case study is designed for new-age Master of Business Administration and executive management programs. It should be used in entrepreneurship and strategic management courses to discuss small innovative e-bike start-ups. This includes conducting a competitive analysis and self-assessing a firm's market-oriented strategies. Prima facie, undergraduate and postgraduate students are beneficiaries of this case. This case study may also be conducive to teaching how to initiate a sustainable and green vehicle business. This case study guides students entering the EV business, addressing industry-specific challenges and conducting market analysis.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

After reading this case study, students will be able to understand the impact of cyber threats on businesses; explore the intersection of innovation and ethical considerations; understand the proactive role of entrepreneurs in identifying gaps in traditional industries, such as insurance, and innovating solutions that align with local dynamics; and learn to formulate strategies addressing cultural factors, market gaps and challenges.

The case study follows Hasnain, a prosperous entrepreneur in Pakistan, who was surprised by the news of a cyberattack on Bank Islami. This event, coupled with a personal data breach in his family’s business, triggered Hasnain’s willingness and interest to address the growing threat of cyber risks and attacks. As the progenitor of a digital solutions startup, he identified a gap in the insurance industry’s replication to cyber threats and envisioned the desideratum for a Sharia-compliant cyber-insurance product withal called cyber risk takaful. The case study explores Hasnain’s journey as he contemplated the challenges of introducing cyber risk takaful – a Sharia-compliant insurance solution for businesses and individuals. Apperceiving the low vigilance and perceived costs associated with cyber insurance, Hasnain faced the dilemma of surmounting these barriers in a country where the penetration of insurance, in general, is already minimal. The story raises critical questions: How can Hasnain efficaciously introduce cyber risk takaful to a market reluctant to embrace cyber insurance? What business strategies should he use to engender vigilance and acceptance of this innovative insurance solution? Will businesses and individuals embrace the concept of cyber risk takaful and recognize its paramount in forfending their digital assets?

This case study is designed to meet the educational needs of both undergraduate and postgraduate students, particularly those enrolled in business administration programs. This case study is tailored for students in the final year of BBA and the first year of MBA programs. It is also well-suited for executive education programs that focus on strategic decision-making in the context of emerging market challenges, such as entrepreneurship and corporate strategy. The case study is particularly relevant for courses centered on entrepreneurship, business strategy, strategic management and corporate strategy.

Teaching notes are available for educators only.

CSS11: Entrepreneurship.

After completion of the case study, students will be able to identify the strategic key components of the Woolah tea brand through the business model canvas framework, to evaluate the major challenges faced by different stakeholders, to analyse the potential effects of bagless tea dip innovation and understand the principles of design thinking and its application in developing innovative solutions, to assess the strategic framework of Woolah tea brand to scale up its business and operations and to align the Woolah tea brand’s sustainability practices with a triple bottom line approach and contribution to UN Sustainable Development Goals.

Upamanyu Borkakoty and Anshuman Bharali, the founder duo of Woolah tea, began their entrepreneurial journey on a noble note. They recognised that plastic tea bags, which customers worldwide consume, create harmful health effects in the form of microplastic. They aimed to provide an authentic and sustainable tea experience while making it microplastic-free. When the world is heading towards securing a sustainable future, they envisioned adding a feather to it by proposing their Truedips. The USP of their product is Truedips – a tea ball they prepare by compressing one bud and two premier leaves. The founders were convinced that their innovative idea of tea consumption would provide customers with an authentic and exhilarating experience. However, there were dilemmas and roadblocks. They faced roadblocks related to the farmer’s traditional approach to growing tea, untrained tea growers, lack of financial assistance and customer readiness for a bagless tea experience. The dilemmas they faced related to their customer acceptance of their idea and the price affordability of the product. The big question hovering around was the customer’s feedback and acceptance of the product.

This case study suits graduate and postgraduate business administration students and other management programmes. The case study can also be used for business, marketing, design thinking, innovation and and social entrepreneurship courses.

Teaching notes are available for educators only.

CSS 3: Entrepreneurship.

The primary learning objectives/outcome of case discussion is to apply design thinking principles to design innovative and socially responsible strategies that promote financial sustainability for organizations serving unique societal needs. The secondary learning objectives/outcome of case discussion is to gain a deeper appreciation for the potential social impact of their innovative ideas and understand the complexities and ethical considerations in social entrepreneurship, especially when working with individuals with special needs.

The case study describes the challenge facing Anil Kumar Kundra, the founder and trustee of Autism Ashram and Autism Guardian Village in Hyderabad and Gujarat, an organization that provides shelter and care for individuals with autism and residential facilities for their parents. Autistic individuals often lack social skills and may face challenges in reading, writing and communicating. In addition, they may experience behavioral issues, making it difficult for them to obtain employment or run their own ventures, resulting in a lifetime financial dependency on their guardians. In August 2023, Kundra, in pursuit of sustainability, aims to empower autistic individuals in the ashram to attain financial independence. He envisions Autism Ashrama as a self-sustaining entity, no longer dependent on contributions from parents. The dilemma facing Kundra is the need to identify innovative ideas that will enable these autistic individuals to contribute to revenue generation. The challenges faced by autistic individuals in their day-to-day lives make Kundra’s decision-making complex. While he acknowledges the challenge, he firmly believes that a handful of transformative ideas can bring about a revolutionary shift in the ecosystem for autistic individuals, rendering this business model truly sustainable. The case study invites students to help Kundra identify innovative ideas using design idea techniques, such as the Stanford d.school model.

This take-home assignment is suitable for both undergraduate and postgraduate students and is designed to explore the integration of sustainable business practices and design thinking in a real-world context.

Teaching notes are available for educators only.

CSS 7: Management science.

After reading the case and answering the case assignments, students will be able to understand and explain the challenges and opportunities for engineering, procurement and construction (EPC) contractors and their subcontractors; understand and critically analyse the advantages and disadvantages of insourcing and outsourcing of engineering, procurement and construction in EPC projects; determine which situations merit insourcing or outsourcing within each of engineering, procurement and construction in EPC projects; understand and identify the competencies and qualifications that a subcontractor must possess if any EPC activity is outsourced to them; and develop a decision-making framework to determine which EPC activities must be kept in-house or outsourced in EPC projects.

In mid-March 2021, PetroSahand International Group, a leading EPC contractor specializing in the oil, gas and petrochemicals industries in Iran, encountered significant challenges with its subcontractors in engineering and construction. These issues resulted in widespread repercussions for the company, including project delays and mounting debts. At the peak of these crises, PetroSahand’s senior management embarked on a thorough examination of whether to insource or outsource various aspects of their operations, such as engineering, procurement and construction. Their objective was twofold: to prevent similar setbacks in future projects and to navigate existing projects with minimal disruption to the company’s reputation. To address this critical dilemma, PetroSahand enlisted the expertise of a consulting team from Sharif University of Technology. Comprising esteemed professors, graduates and students from one of Iran’s most respected institutions, this team undertook an exhaustive analysis of the insourcing versus outsourcing debate across EPC domains. Subsequently, they presented their comprehensive findings, thereby confronting PetroSahand’s senior management with a pivotal choice regarding the optimal approach for each activity.

The audience of this work is undergraduate and graduate students who are enrolled in project management courses, both fundamentals and advanced. In addition, this case helps senior managers of EPC contractors gain a deeper and more comprehensive understanding of insourcing or outsourcing different project activities.

Teaching notes are available for educators only.

CSS 7: Management science.