Case studies

The learning outcomes are as follows: to identify and analyze the importance of operations management in a situation demanding minimizing environmental impact and maintaining operational momentum; access the risks faced during project executions and apply project management concepts to facilitate Karachi Steel in implementing indigenous technological solutions; and evaluate the importance of adaptability, continuous improvement and innovation in creating sustainable solutions to address complex challenges.

Javaid Iqbal, CEO of Karachi Steel, was the case’s protagonist. With capacity expansion, Javaid relocated the steel facility from Rawalpindi to Islamabad, Pakistan. The company encountered several difficulties because of the air emissions’ inconvenience to nearby residents and the strict environmental regulations. To push the emissions into the air, the company first installed a locally fabricated chimney. Later, they hired a foreign Pakistani engineering firm to install air filters, but the project proved unsuccessful. To control emissions, the company developed a Wet Particulate Control (WPC) system based on a water-sprinkling mechanism. The endeavor was successful, but it resulted in water pollution. As a result, Karachi Steel signed a contract with a local engineering company that invented and effectively installed an air filtration system. Karachi Steel not only devised solutions for their predicaments but also made significant contributions toward achieving the Sustainable Development Goals (SDGs). However, the emissions reporting and monitoring mechanism continued to cause inconvenience for regulators. In addition, the filtration facility encountered a blocked duct conveying zinc sulfate from smoke, resulting in the periodic suspension of operations. As Karachi Steel seek long-term solutions to current challenges, it is critical to examine the relationship between internal circumstances and external forces and stimulate a holistic approach to resolving issues within the realms of operations management and project management.

The case study is suitable for students pursuing their undergraduate degree programs in business studies or management sciences. This case can be taught in specific subjects in the domain of management sciences, including project management and operations management. Furthermore, undergraduate students pursuing degrees in environmental sciences, specializing in environmental impact assessment and sustainable development, can also learn from this case study. These subjects have the potential to provide students with a detailed understanding of the dynamic relationship between environmental problems caused by business activities, and how to address these challenges using principles of project management and operations management. There is no pre-requisite for this case study, and the level of difficulty is moderate. The recommended teaching pedagogy for this multidisciplinary case study includes role-playing exercises, simulations to replicate real-world situations and the Socratic method, which encourages critical thinking.

Teaching notes are available for educators only.

CSS 7: Management Science.

The primary learning objectives/outcome of case discussion is to apply design thinking principles to design innovative and socially responsible strategies that promote financial sustainability for organizations serving unique societal needs. The secondary learning objectives/outcome of case discussion is to gain a deeper appreciation for the potential social impact of their innovative ideas and understand the complexities and ethical considerations in social entrepreneurship, especially when working with individuals with special needs.

The case study describes the challenge facing Anil Kumar Kundra, the founder and trustee of Autism Ashram and Autism Guardian Village in Hyderabad and Gujarat, an organization that provides shelter and care for individuals with autism and residential facilities for their parents. Autistic individuals often lack social skills and may face challenges in reading, writing and communicating. In addition, they may experience behavioral issues, making it difficult for them to obtain employment or run their own ventures, resulting in a lifetime financial dependency on their guardians. In August 2023, Kundra, in pursuit of sustainability, aims to empower autistic individuals in the ashram to attain financial independence. He envisions Autism Ashrama as a self-sustaining entity, no longer dependent on contributions from parents. The dilemma facing Kundra is the need to identify innovative ideas that will enable these autistic individuals to contribute to revenue generation. The challenges faced by autistic individuals in their day-to-day lives make Kundra’s decision-making complex. While he acknowledges the challenge, he firmly believes that a handful of transformative ideas can bring about a revolutionary shift in the ecosystem for autistic individuals, rendering this business model truly sustainable. The case study invites students to help Kundra identify innovative ideas using design idea techniques, such as the Stanford d.school model.

This take-home assignment is suitable for both undergraduate and postgraduate students and is designed to explore the integration of sustainable business practices and design thinking in a real-world context.

Teaching notes are available for educators only.

CSS 7: Management science.

After reading the case and answering the case assignments, students will be able to understand and explain the challenges and opportunities for engineering, procurement and construction (EPC) contractors and their subcontractors; understand and critically analyse the advantages and disadvantages of insourcing and outsourcing of engineering, procurement and construction in EPC projects; determine which situations merit insourcing or outsourcing within each of engineering, procurement and construction in EPC projects; understand and identify the competencies and qualifications that a subcontractor must possess if any EPC activity is outsourced to them; and develop a decision-making framework to determine which EPC activities must be kept in-house or outsourced in EPC projects.

In mid-March 2021, PetroSahand International Group, a leading EPC contractor specializing in the oil, gas and petrochemicals industries in Iran, encountered significant challenges with its subcontractors in engineering and construction. These issues resulted in widespread repercussions for the company, including project delays and mounting debts. At the peak of these crises, PetroSahand’s senior management embarked on a thorough examination of whether to insource or outsource various aspects of their operations, such as engineering, procurement and construction. Their objective was twofold: to prevent similar setbacks in future projects and to navigate existing projects with minimal disruption to the company’s reputation. To address this critical dilemma, PetroSahand enlisted the expertise of a consulting team from Sharif University of Technology. Comprising esteemed professors, graduates and students from one of Iran’s most respected institutions, this team undertook an exhaustive analysis of the insourcing versus outsourcing debate across EPC domains. Subsequently, they presented their comprehensive findings, thereby confronting PetroSahand’s senior management with a pivotal choice regarding the optimal approach for each activity.

The audience of this work is undergraduate and graduate students who are enrolled in project management courses, both fundamentals and advanced. In addition, this case helps senior managers of EPC contractors gain a deeper and more comprehensive understanding of insourcing or outsourcing different project activities.

Teaching notes are available for educators only.

CSS 7: Management science.

The case delves into the significant factors contributing to the steep decline of Sintex shares, examining both external and internal factors. Internally, the primary drivers were the expansion plan, the demerger decision, financial mismanagement and the delayed and inadequate integration of Information Technology (IT) into the business.

Sintex, a prominent private sector company listed in the Indian stock markets, operated in the textile and plastics sectors. However, in 2017, Sintex underwent a demerger into two separate entities: Sintex Industries Limited (SIL) and Sintex Plastics Technology Limited (SPTL). While SIL focused on textiles, SPTL dealt with plastics. However, soon after the demerger, the share prices of both companies began plummeting, leading to significant losses for investors. This case investigates the reasons behind this decline through a step-by-step analysis.

This case is suitable for postgraduate students pursuing an MBA, MMS and executive programs such as PGDBM and PGDM, with a specialization in business strategy. It is also beneficial for participants in management development programs (MDPs) designed for higher level executives. Additionally, the case can serve as training material for executives undergoing strategic role training within an organization. It is recommended to teach the case toward the end of the course, where the instructor can provide a summary of the previous classes’ teachings.

CCS7: Management Science

Upon completion of the case study, the students will be able to find the challenges and underlying structures that cause the problem; the students will be able to identify the dynamic variables and develop the interconnection and interlinkages among the time-delayed variables to build the story of the business case; the students could develop the block diagram and could build the system dynamics model using the simulation software STELLA, and if they do not have the simulation software, even then they could have a mental model to understand the problem well; the system dynamics students can design the policies to make the system better behaved and recommend solutions; and the students could make mind maps and develop the mental model and could recommend solutions and way forward to overcome the challenges and solve the issues.

Tradeasia is a small-scale manufacturing firm that had started its business activities near Sundar Industrial Estate, Raiwind, in September 2007. The company’s prime focus was to buy the potato starch from chips manufacturing companies and, then, extract the potato starch from the waste potato using its own machinery and sell it as a sizing agent to textile mills. Quality characteristics in terms of better millage and enhanced gullibility made it compatible with Rafhan corn-based starch. The major challenge linked to potato starch was its degree of wetness; the potato starch either extracted from rotten potato or procured from the potato chips manufacturing companies had a high degree of wetness and moisture content. Wet potato starch sometimes had more than 60% moisture content, which was really a challenge. Owing to the high degree of wetness, the wet starch was prone to fungus growth, and within hours, the fungus created toxins if it was not dried immediately, and then after 24 h, toxins acquired a black colour, and they became hardened like pebbles. The starch then was unusable even for sizing purposes for textile products. Reduction in the degree of wetness was really a big challenge and demanded prompt action and high productivity of the operational staff to make that product dry for sale purposes. This was the biggest challenge that ended up in huge inventories of wet starch. Capacity constraints and operational inefficiency killed the company’s productivity and affected the company’s profit.

This case study is written and developed for MBA and MS-level supply chain students of the system dynamics course or those studying management of supply chain complexities. This case study discusses the operational challenges while running the business; huge inventories, capacity constraints and inefficiency in production operations were the challenges associated with almost all manufacturing industries. This case study discussed not only why such challenges are appearing in the business but also the solution that resided in the wisdom shared by the employees in the board meeting. An integrated system dynamics model could be used to design the policies to overcome such challenges. Even the block diagram of the model and causal loop diagram could help to conceptualize the problem and explore the way forward.

Teaching notes are available for educators only.

CSS 7: Management science.

The case study will encourage reflection on the challenges that organisations face in attracting, engaging and retaining knowledge workers that are critical to their performance and growth. It is set in the context of innovative, high-tech organisations whose success is heavily dependent on the performance of information technology (IT) professionals, a specialised and heavily demanded workforce.

The case study depicts the struggle of Manoel Almeida, Descomplica’s chief technology officer, to reverse the scenario of demotivation and high turnover among IT employees and to attract new talent. The case study addresses the themes of knowledge worker attraction, engagement and retention, with a focus on IT professionals.

This case study is designed for undergraduate and graduate education programmes/courses.

Teaching notes are available for educators only.

CSS 7: Management science.

After completion of this case study, the students will be able to comprehend the importance of communication in managing change, examine the role of processes and systems in implementing change management initiatives at a large scale, assess the effectiveness of various strategies in mitigating resistance to change and recognise optimal strategies for communication processes and messages with respect to different audience and contexts.

This case study discusses decisions and strategies that led to Indore (a city in the state of Madhya Pradesh, India) becoming India’s cleanest city for the sixth time in a row. The case explores if the various strategies used by the commissioner of Indore Municipal Corporation would continue to succeed in mitigating resistance to change from the citizens of Indore or if the change management strategies needed to be revised. Amidst intensely rising competition from other cities, especially Surat (a city in the state of Gujarat, India), the case delves into the commissioner’s efforts to defend Indore’s claim of being India’s cleanest city for the sixth consecutive time.

This case study is suitable for use in executive modules and management development programs. It can be used for the following courses: ■ In change management course, this case study can cover critical aspects of strategies to mitigate resistance to change and bring about lasting behavioural changes in followers.■ In communication courses, this case study can cover key aspects of communicating the change vision of a leader to a large audience.

Teaching notes are available for educators only.

CSS 7: Management science

This case study covers different concepts related to leadership. It should help students analyze business situations from a leader’s perspective. By the end of this case study, students would be able to understand the role and the characteristics of leadership during a crisis using the 11 dimensions of character framework, map leadership personalities using the HEXACO model to understand the effectiveness of certain traits in crisis management and apply theories of change management using the Satir and Switch models, in addition to Kotter’s theory of change.

Elsewedy Electrometer Group (EMG) was owned and operated by Emad Zaki Elsewedy as the sole founder and chief executive officer (CEO). EMG was a leading company in the meters industry in Egypt. The time span of this case study covered the period from November 2011, when Elsewedy’s health was deteriorating, to his early retirement in September 2012, and his comeback, two years later, in September 2014. In November 2011, against the backdrop of Elsewedy’s deteriorating health and subsequent early retirement in September 2012, EMG faced several challenges in achieving its vision that hindered its business growth. These arose after Youssef Salah, the former export director of EMG, was appointed as the company CEO. In Elsewedy’s absence, EMG faced liquidity problems, as the banks demanded that it repay all its debts. At the same time, the business suffered severe losses owing to its inefficient operations. Elsewedy decided to return to EMG in September 2014 to find a solution and help the business recover to ensure its continuity and sustainability. After taking a holistic view of the crisis at hand, he was faced with a dilemma and several questions: Was the company leadership effective? Would a change in leadership be required? How could he lead effective change in light of the current crisis? How could he ensure that EMG did not end up in a similar predicament in the future? This case was designed to teach leadership in crisis and change management in the metering industry.

This case study is intended for graduate and undergraduate students studying a leadership or management course. It can help students comprehend the challenges that arise when a large business undergoes a management transition during a crisis. The case study also considers how leaders are shaped by crises. This case study can be considered as level 1 on a 1–3 scale, as the full description of the situation is given in the case study and the task of the students is to analyze the leader and his decisions using various academic concepts and theories (Erskin et al., 2003).

Teaching notes are available for educators only

CSS 7: Management science

The purpose of this study is to make students understand the logic behind and implications of the “Socio-Technical Imbrication Framework” that can help them understand the importance of aligning workforce motivation and capabilities with the modern technology deployed in the organization. Moreover, students will understand the essentiality and criticality of customer satisfaction for the organization.

The technical services operations team at Cotton Web Limited formerly relied on JS Node, e-coordination system, to address customer complaints. There were many bugs in that system as it did not carry along the complaint tracking protocol, was slow in response, fundamentally structured upon manual complaint record keeping that resulted in piling up un-resolved complaints for a longer period of time. The team under the leadership of Mr. Hasan Ali, a competent expert working as GM Research and Data Analytics, undertook detailed analysis of recurring glitches in this system and replaced it with a novel Web-based automated complaint management system at Cotton Web Limited. This entire diagnosis and intervention process took almost three months till completion. The case is written for use in courses in the curriculum of BBA, BBIS, BSIT and BSCS programs at undergraduate level. It is most suitable for the courses in leadership, change management, business process reengineering, soft engineering, team building and business communication.

The case is suitable for teaching at Undergraduate level to the students of BBIS, BBA, BSCS and BSIT students in the last year of their degree programs. Teaching faculty can use case-based methodology for student learning by putting them into a real-life situation faced by an organization and letting them think critically and identify following points for further discussion and clarity: individual or in groups; problem identification through discussion; the stakeholders involved in the company’s situation through presentation or one-pager presentation; case analysis with reaching best solution to prevailing issue at hand through group discussion; reaching a decision or solution with reasonable logic and justification through group discussions; and create further dilemma on the basis of questions unanswered within this case story.

Teaching notes are available for educators only.

CSS 7: Management Science.

The case has the following learning objectives:

1. understand the various types of comparisons that are possible between groups over time and across space;

2. evaluate a policy intervention using relevant data and different methods; and

3. understand the meaning of the phrase “controlling for other relevant factors” in regression and non-regression contexts.

The difference-in-differences (DID) approach is a useful tool for making meaningful comparisons. This case tries to provide a non-technical introduction to the approach using a basic comparison of crime rates among districts in Punjab (Pakistan's largest province). Being the most populous region of the country, Punjab faces many governance challenges, and street crime is one of them. (Exhibit 5 provides additional information about the geographical and administrative setting used in this case study.) In 2016, Chief Minister Shahbaz Sharif established the Dolphin (police) Force in different locations to improve urban patrolling and reduce street crime. There were debates about the effectiveness of the Dolphin Force (DF).

Those who are skeptical of DF point to various situations that were handled incorrectly by DF personnel, as well as other administrative and operational problems in the initiative. Optimists believe it is beneficial and want it to be expanded to other districts and regions. The threat of street crime claims many lives and, according to optimists, necessitates the formation of a special force. Whether the huge resources invested in the DF worth their lot or not can be known through sound statistical analysis that can identify the difference in the rate of crime because of the DF. In this instance, the case provides information to answer the following question:

Is there a significant difference in crime rates between areas where the DF is operating and districts where it has not yet been installed?

In quantitative/statistical analysis classes, the case can be used to teach the DID technique to MBA/MS Applied Statistics/Applied Data Analysis students. It can also be used in undergraduate Econometrics classes.

Teaching notes are available for educators only.

CSS 7: Management Science.

The learning outcomes are as follows: identify and evaluate the impact of risk factors for health-care organizations during crisis; evaluate the role of different organizational factors in building resilient health-care organizations; define organizational resilience in a health-care context; and apply the effect-strategy-impact resilience framework.

September 2022 found Ranjan Thakur, the Hospital Director at Manipal Hospital, Jaipur (MHJ) reflecting on MHJ’s resilience toward future health-care crises. MHJ was established in the capital city Jaipur of the Indian state of Rajasthan in 2014, as a 225-bed multispecialty unit of the nationally renowned Manipal Health Enterprises Ltd. As the Hospital Director, Thakur had been responsible for navigating his team and the hospital through the multiple health-care related challenges exacerbated by the multiple waves of the Covid-19 pandemic in a large Indian state with a sizable rural and semiurban population. Though Thakur and his team of doctors had worked through the vulnerabilities of their health-care ecosystem, mapping the risks and mitigating the same, Thakur asked himself if they had done enough. He wondered how a health-care institution such as theirs could sustain effective health-care delivery during future crises situations to deliver high-quality health care to the vulnerable communities. Had they effectively mapped MHJ’s vulnerabilities and built resilience into the hospital’s functioning? The backdrop of the case is public health in the state of Rajasthan (Jaipur), and the case is rich in detailing social factors such as behavior issues of patients, doctors and nurses; operational factors such as standardization of treatment and standard operating procedures, availability of resources, clinical concerns; leadership and management of the hospital through the pandemic. This case can be used by instructors to teach organizational resilience building in the health-care context.

Graduate- and executive-level courses in managing change during crisis in health-care context; health-care management/leadership.

Teaching notes are available for educators only.

CSS 7: Management Science.

• After working through the case and assignment questions, students will be able to do the following:• Identify the difference between core competencies and dynamic capabilities and how they make a difference in a crisis towards building an agile organisation.• Evaluate the support through a collaborative, temporary, trans-organisational system to local manufacturers to achieve agility and sustainability.• Realise the importance of clear expectations exchange and communication between partners to enhance collaboration, even in temporary structures in increasing agility and sustainability.

The COVID-19 pandemic and subsequent lockdowns created a crisis for South Africa and the President, Cyril Ramaphosa called for urgent collaboration between business, labour and government to meet the demand for locally produced Personal Protective Equipment (PPE) and medical devices. The case illustrates this response and collaboration between government, labour and business through a temporary newly formed structure, called Business for South Africa (B4SA). Ross Boyd, Head of the innovation work stream of B4SA which housed the local manufacturing partnership (LMP) was considering his dilemma of how to be agile in sustaining their support to the South African manufacturers even though the LMP was a temporary structure. The local manufacturers had to repurpose their production lines to produce local PPE and medical devices. How could the LMP support the South African manufacturers to sustain their agility in building capabilities during COVID-19? At the same time, Ahmed Dhai, the Group Executive of Operations of Kingsgate Clothing, which was benefiting from the support of the LMP, was reflecting on his leadership in taking decisions to repurpose production and increase capacity during COVID-19. Dhai was considering his dilemma of being agile during and beyond the COVID-19 pandemic. The case features several decisions taken by Kingsgate and offers students the opportunity to evaluate these decisions given the fluctuations in supply and demand of PPE and the leadership that Dhai demonstrated in how he communicated and dealt with his staff during the pandemic. Students could also give recommendations to Ross Boyd and Ahmed Dhai on how they could lead their organisations to be more agile during and beyond COVID-19.

The case study is suitable for MBA or MPhil level on Strategy courses. The case would also find good application in Organisational Behaviour and Leadership courses on Masters level and Executive Education programmes.

Teaching notes are available for educators only.

CSS 7: Management Science.

Upon completion of the case study discussion, successful students will be able to define and list the steps of time-driven activity-based costing system (TDABC); understand and explain the ideas behind the TDABC; implement the TDABC in customer profitability analysis; draw connections among the cost and profitability analysis; evaluate the importance of better costing techniques in profitability analysis; and make managerial decisions based on TDABC analysis.

Gluten Limited’s financial affairs and operations manager, Fatih, was aware that the company was making very little profit from its operations with its biggest customer. The main reason appeared to be that it delivered its products in bulk to the main warehouses of the customer, which then distributed them to the stores. Fatih believed that products were being sent to stores late, so that their expiration dates passed quickly and they ended up being returned.

The case study documents the past year of Gluten Limited’s delivery operations with one of its biggest customers. It focuses on the effectiveness of its delivery operations and ways to increase profitability by reducing sales returns. The case dilemma involves the choices that Fatih faced following a six-month trial period: either delivering products in bulk to the customer’s main warehouses at lower cost but higher return rates or delivering small amounts directly to stores at higher cost but lower return rates. Fatih needed to decide which mode of customer operations was more profitable and continue that way.

Knowing the importance of determining costs properly in profitability analysis, Fatih made the cost calculations using the TDABC system.

This case was written for use in Cost Accounting and Managerial Accounting classes at the undergraduate level. The focus of the case aligns well with discussions of customer profitability analysis, cost reductions, eliminating non-value-added activities, and profitability of operations. Instructors seeking to emphasize the most suitable costing methods for customer profitability analysis could assign this case.

Teaching notes are available for educators only.

CSS 7: Management Science

1. Probabilistic calculations of cost, and profit/loss using standard probability functions

2. Decision tree to find the expected monetary value (EMV) of different options.

3. Monte Carlo simulation for risk analysis.

4. Risk analysis in project management.

Learners will be able to understand and apply the following: how to approach uncertainty in business decisions using probabilistic calculations of cost, and profit/loss using standard probability functions; how to address uncertainty in business decisions by looking forward and reasoning backward, using the decision tree technique and the EMV of different decisions; how to analyse the risk inherent in business decisions by incorporating probability distributions for all critical variables in the form of Monte Carlo simulation; and appreciation of strategic considerations in risk analysis as it applies to project management

The case describes the challenge facing Vilas Birari, the owner and chief executive of Harsh Constructions, a construction company headquartered in Nasik, India. Birari had to decide on the bid for a construction project in September of 2021, during the COVID-19 (COVID) pandemic. Due to successive waves of the pandemic, the state and federal governments announced lockdowns intermittently, causing uncertainty in costs related to labor, material and project completion. The dilemma before Birari was how to set a bid price that was not so low as to incur a loss and not so high as to lose the bid to competitors. The uncertainty made Birari’s decision-making complex. The case invites students to help Birari find an optimum bid price by using various quantitative techniques, such as Monte Carlo simulation and decision trees.

This case is intended for students of management at a master’s level, in an elective course on management science, which is often also known as decision science. This compact case can be positioned in the second half of the course, when exploring risk management using computer simulation as a tool. The case serves both as an introduction to using simulation to manage uncertainty as well a contrast with simpler methods that are covered earlier in the course.

Teaching notes are available for educators only.

CSS 7: Management Science.

The learning outcomes of this study are as follows:

1. comprehending foundational dimensions of brand equity and criteria to compare the use of traditional and new media in leading brand communication appropriateness and performance;

2. understanding and evaluating implications of leading brand communications during times of crises; and

3. creating recommendations for leading brand communication preparedness and response to crises.

On 16 August 2020, Dr Barbara Jensen Vorster, Senior Executive Manager, Communications and Marketing of the Gautrain Management Agency (GMA), in Midrand South Africa, considered her dilemma of adapting their communication approach during COVID-19 and beyond the current crisis. The GMA relied on traditional media and the crisis created an opportunity to rethink their entire communications approach. It was important to the GMA communications team to keep the Gautrain commuters connected even though they might not be using the Gautrain during the lockdown of COVID-19. Jensen Vorster believed that a brand should be adaptive and continue even when a service is not running. Jensen Vorster had to lead her communications team when they were all working from home, and they had to keep commuters informed of the requirements during the different levels of lockdown in South Africa. Their various campaigns during this time purposefully communicated with commuters and the various “staying home” initiatives with the intention of lifting spirits. The communication outreach during the COVID-19 pandemic switched over to social media communications out of necessity; however, was that ideal communication during a crisis? While most of the case focuses on this external communication, the case pays attention to some internal communication initiatives by Jensen Vorster with her own team and for the Gautrain’s staff. The question is whether brands should shift from traditional media to new media campaigns during the 21st-century crises? Students will get the opportunity to compare the use of traditional and new media during crisis times. How might they approach their brand communications during COVID-19 and in preparation for future crises?

Marketing and Business Communications and Leadership courses for MBA or executive education programs.

Masters level MBA.

The team of authors conducted face-to-face interviews prior to and during the lockdown in South Africa; the interviews were conducted online through Zoom. Interviews included Dr Barbara Jensen Vorster, Senior Executive Manager, Communications and Marketing of the Gautrain Management Agency and Kesagee Nayager, the Marketing and Communications Executive Manager at Bombela Concession Company. Viwe Mgedzi, Executive Manager for Knowledge Management, provided documents supporting the case. The researchers also conducted desktop research of secondary data, including media and press articles on the companies. The @Gautrain Twitter feed was very important for the researchers to investigate as part of the secondary data research, to triangulate the interview data.

For example, see one of the Twitter feeds on 17 March 2020, 5:37 pm.

The following Twitter feed on the Gautrain’s status confirmed the interview data: https://twitter.com/TheGautrain/status/1239938937885466633

The main resources of this case study were the interviews and the media articles to offer objective references. The authors used the following two newspaper articles to triangulate the information they gained from the interviews:

BusinessTech, March 18, 2020, accessed March 8, 2021 at https://businesstech.co.za/news/lifestyle/382707/south-african-coronavirus-cases-jumps-to-116-as-a-gautrain-exec-tests-positive/

Timeslive, www.timeslive.co.za/news/south-africa/2020-03-17-staff-in-self-isolation-after-executive-tests-positive-two-gautrain-stations-chemically-decontaminated/

Teaching notes are available for educators only.

CSS 7: Management science; CSS 8: Marketing.

Students comprehend the importance of the transformational idea and apply it in their leadership. Students can analyze how to spread the transformational idea across the team and the organization. Students understand the value of working with different stakeholders (partners, headquarters). Students can analyze the role of focusing on a client and apply client-centric way of thinking. Students can apply the concept of the transformational idea to create (synthesize) possible solutions for the presented dilemma.

This case tells the transformation story of the logistics company Ekol Ukraine, which began in 2013. This company was the most successful branch of Ekol Logistics, an international corporation operating in 13 countries. From 2013 till 2021, Ekol Ukraine experienced a crisis related to the start of a conflict between Ukraine and Russian militants. It proved its ability to cope with challenges, gained almost complete autonomy from the head office, transformed the business model and culture and achieved considerable success in building an ecosystem.

Having this stage of transformation completed by 2021, the company reached a plateau and had to decide what the following changes would be. In 2021, only 14% of Ukrainian businesses used outsourcing logistics services (like the ones Ekol Ukraine provided). The remaining 86% had in-house logistics and were not ready to change the model. So, Ekol Ukraine faced a problem: how could a logistics provider grow in a market that was not mentally ready to outsource?

MBA programs.

Teaching notes are available for educators only.

CSS 7: Management science.

At the macro level, the case study enables the students to appreciate the complexity emerging market economies face in achieving economic development and environmental sustainability without comprising each other. The students understand the importance of behavioural change and empowerment of communities in projects dealing with transformational social changes. Theoretically, the students learn about the change mechanisms and organisational practices market-based organisations install to drive their positive social change (PSC) projects. At the micro level, students learn about the process of setting up Mangalajodi Ecotourism Trust (MET) – that not only enthused the local community economically but also instilled it with awareness and motivation towards sustaining its ecosystem. Analytically, at macro level, it assists the students to have a lens of PSC framework to examine corporate social responsibility, social entrepreneurship and BoP strategies of market-based organisations to affect social change. Application/problem solving: The case study explains to the students how the PSC levers of motivation, capability and opportunity structures were applied by NatWest Bank during different phases of project execution. As management grapples with new problems, the students are encouraged to use the levers to recommend an action plan. It allows students to apply SWOT and think of competitive strategies for MET. It allows students to think of strategies that may apply for a better management of Ecotourism at Mangalajodi.

As part of its broader commitment to sustainable development and climate change action, the NatWest Group (formerly Royal Bank of Scotland Group) launched its Supporting Enterprise Programme in India in the year 2007. The project aimed at creating income-generating opportunities for indigenous and economically vulnerable sections of society living in critical natural ecosystems. The project was under the leadership of N. Sunil Kumar, a zealous nature lover, with over two decades of experience in business strategy and public affairs and a specialty in environmental sustainability. He headed Sustainable Banking at NatWest and was head of NatWest Foundation-India. The Mangalajodi project shared the problems many of NatWest’s other projects in India presented. Poor communities that relied solely on natural resources for their sustenance slid deeper into poverty as ecosystems degraded. Lacking alternative sources of livelihood and facing scantier resources, the communities helplessly caused additional damage to weak ecosystems when they drew on the resources even more vigorously. Poaching of migratory birds for supplemental income was a huge problem at Mangalajodi; it was not only rapidly altering the ecosystem to sustain the birds but also deteriorating and weakening its ecology as a whole. Measures to eliminate poaching were failing in the absence of alternate means of livelihoods and a strong incentive to protect the birds. MET was established under the project in 2009. A decade later, it had become a resounding success. A community-owned and run enterprise, MET was providing direct employment to over 100 poorest families at the tiny village and creating income-generating opportunities and entrepreneurial ventures for many others. Poaching was practically negligible at Mangalajodi, and the community was drawing huge admiration for its role in conserving the ecosystem. However, the progress of Mangalajodi Ecotourism was paradoxical, on the one hand; its popularity was rising but, on the other hand, it was becoming overcrowded and looked ill managed. Its rising commercial value was bringing in more land developers, builders and investors, but permanent concrete structures were also coming up quite unscrupulously. There were many challenges – how should growth of ecotourism at Mangalajodi be managed? What mechanisms and practices ensured that the community was empowered enough to participate in decisions of land use, infrastructure, energy and waste management at Mangalajodi? How should MET become more competitive and innovative to grow despite future challenges?

The case study is useful for students of Management at Under Graduate and Post Graduate Levels for understanding the following: the sustainability of fragile ecosystems; the community at the intersection of sustainable development and natural resources conservation and protection of biodiversity; knowing in detail about the planning, implementation and management of ecotourism projects; and decisions regarding community-based ecotourism projects.

Teaching Notes are available for educators only.

CSS 7: Management Science

After working through the case and assignment questions, students will be able to do the following: • Analyse the aspects of strategic leadership and evaluate effectiveness of the leadership in the case study. • Identify stakeholders in a large-scale project and differentiate between their needs and sources of power. • Establish what behavioural mechanisms can be used by leaders to gain support from stakeholders with seemingly divergent pro-poor and pro-growth development orientations for expansion in an emerging market context. • Generate recommendations to communicate the benefits of expansion plans.

On November 8, 2019, Jack van der Merwe, the chief executive officer of the public rapid rail organisation, Gautrain Management Agency (GMA), was considering how to influence stakeholders to support the pace of the expansion planning phase, without alienating the surrounding communities and balancing the various and sometimes opposing stakeholder interests. The case highlights the background to this dilemma in offering the financial background of the Gauteng province and the evolution of the Gautrain project in the context of an emerging market country characterised by institutions at different development levels and how the unique characteristics of the protagonist could influence stakeholder orientations. The case illustrates how the Gautrain is at the centre of a complex transport conflagration in the South African transport ecosystem. Specific stakeholders and their needs are exposed in the case to enable students to analyse their several levels of influence on the project and proposed expansion. The differences between pro-poor and pro-growth development orientations are also highlighted in this case as input to describe the dilemma Van der Merwe faced in his influencing role in this particular South African context. Students will gain insight into how to manage the tensions between pro-poor and pro-growth orientations.

The case is suitable for a graduate-level course on strategy; organisational behaviour; or leadership. The case is also suitable for a post-graduate-level course on an MBA or MPhil program on strategy and leadership.

Teaching notes are available for educators only.

CSS 7: Management Science.

Learning outcomes are as follows: Students will understand the main characteristics of Agile leader and importance of these characteristics in successful change management. Students will understand how Agile leader works to manage changes in organizations and what steps the leader must take to make successful changes in the organization. Students will know in details the Kotter change management model, will recognize and will be able to apply this model in real-life situations.

The case study is about the College of Business Administration (CBA). The CBA is a private higher education institution located in Riga, Latvia, Eastern Europe. The CBA provides professional higher education programs. The case study tells the story how Susan was at first hired as free-lancer for specific tasks at the College in 2017. After successful competition of these tasks, Susan was hired as the new director in 2018. The management at the College was almost non-existent at that moment, and Susan had to face the question how to develop the CBA and make it profitable. Susan had to build her management team, had to review and describe all processes and had to build the internal culture of the organization. Susan implemented change management plan, and in four years, the number of students and lecturers at the College had doubled, and the turnover of the CBA had reached more than one million euros. The case study shows Agile leader characteristics and change management process in details.

Undergraduate studies.

Teaching notes are available for educators only.

CSS 7: Management Science

Following discussion and analysis of the case, students should be able to explore how an individual’s background affects his/her perspective on entrepreneurial opportunities; analyse leadership behaviours that support an innovation process; and understand that constraints can enhance innovation.

This real-life case explores the main protagonist, Joni Brenner, an arts university professor at the University of Witwatersrand (Wits) in South Africa, and how over the past 10 years she worked with a group of co-operative beaders in Zimbabwe who developed hand loomed necklaces that were sold locally and internationally, placed in the African section of museum stores.The case provides an opportunity to explore the evolution of the Marigold product, the characteristics of an entrepreneur and how innovation can come from a very focused and constrained approach. Brenner’s involvement with the co-operative involved the supply of materials, design innovation and product sales. Innovation had come through focusing on the evolution of the core product, through different designs and colour combinations, learning through mistakes and through other artistic collaborations. The case concludes with Brenner questioning whether the innovation approach should be adapted to meet the needs of a potential new customer.

This case is appropriate for undergraduate, graduate and post-graduate, MBA and executive education students focusing on entrepreneurship, small business development and/or innovation.

Teaching notes are available for educators only.

CSS 7: Management Science.